I had lots of the fabric leftover from the dress project. So I figured a skirt wouldn’t go a miss! Nor would a matching hair bow! Check out the pictures below. Super simple elasticated waist. For a 14 Month old I had a 19″ waist and 7″ length for above the knee. I’ll be posting another project that I have done putting more of this fabric to use. It was originally bought to match a custom made cloth nappy my niece had. One metre of fabric has gone a long long way, and there is still more of it left!
This gallery contains 3 photos.
As in the previous post, I have made another dress, but in the next size 18 Months. No pattern because it’s just a large rectangle of fabric for the skirt and as I’ve said before, I used the crochet pattern from here. I thought I’d post as another idea for fabrics you can use.
So pleased with how this turned out. Considering I had just a picture in my mind of how I wanted it to look. I scoured the web for a free crochet pattern for the yoke of the dress as I wasn’t prepared to wing this bit. Plus, it’s been a while since I had a 11 month old to judge the size.
You can go HERE for the crochet part. The rest of the dress I did wing. The skirt part measures 10.5″ incase that’s helpful in sizing. Chest/Waist is 19-20″. This is to fit a 9-12 Month baby. (They also provide instructions for 18 months and 2 years.) However, I just used a length of fabric that I had already. This worked out to just enough to create a few pleats to give the fullness to the skirt. Basically you just have to hem and sew on a panel to the bottom of the crocheted bodice. This could be large pleats like mine or small pin tucks. Depending on what look you wanted. Just measure them as you go around and pin them into place. I recommend a deep hem on the skirt as these press better to create a nice pleated finish when ironed.
I finished it with coordinating ribbon and buttons. The little heart pocket on the skirt is also part of the free crochet pattern. I just threaded a bit of ribbon through the holes and secured it with sewing thread. Always remember to seal off the ends of your ribbon when using it like this tho. You don’t want it ruined with one wash. I used poppers on the back as a fastening, but you could probably utilize the natural holes in the crochet to use small buttons. Just test the buttons first by pushing them through.
You will need 4mm crochet hook and Lightweight cotton DK yarn. Also, at least 150% of the width of the bodice in fabric length to make the skirt. Preferably 200%. Matching sewing thread of course, and at least 3 snaps or buttons for fastening. Everything else is really optional. Just use your imagination! =D
Dinosaur costume from a t-shirt
This is an on going project so I’ll be posting as I’m going. Excuse the photos there hasn’t been much good light and I’m posting using my iPod touch. I’ll add more pictures and descriptions of my progress. To be quite honest there is no ‘plan’ per-say. But it’s for my sons birthday party at the weekend.
Reusing t-shirts that are going to be outgrown soon us an ideal way to get a costume started. This one is more of a vest as it has no sleeves, but any type would do!
Now I’ve started to add the spines , which are actually different sized ‘house’ shapes. And are stuffed with toy filler. As they are sewn so the bottoms are opened up, it pulls in the sides of the ‘house’ shapes and gives more of a stegosaurus shape.
Sooo pleased with this!
A little project just for me. I just couldn’t resist making myself this cute head band. The swan itself was drawn by myself, transferred onto felt and embellished with a lace ‘half’ yo-yo’, then decorated with seed beads. Other decorations I added were some little vintage black buttons, bugle beads and faceted glass beads. For the eye I used a vintage green Mother of Pearl button with a fish eye design. I embroidered a simple trellis on the chest too.
I’m so pleased with this, I’m going to make a few more animal designs. Next I want to try an octopus, I think this will look great too in those white and dirty vintage creams and off pinks. *squeals* can’t wait!
Oh, and to top it off.. I’m going to the NEC in Birmingham to the Sewing for Pleasure Craft Event at the end of March! Will be buying loads of fabric goodies and crafting essentials.
Let me know what you think of my head band below! Happy Crafting. =]
Gift for an avid reader!
These 2 bookmarks were made for my Grandparents. My Grandad is a WWII veteran and his father was in WWI. So a gift to show we still remember what they gave was lovingly received. My Nan, she just loves her flowers. At a risk of being boring or predictable, I designed a Peony flower in a Jacobean style. I guess it could also pass for a rose too. However, I thin it worked out looking nice. Let me know what you think below in the comments!
I want to share some tips with you about working with felt. Although I’m a relative newcomer to felt. I have taken some time working with it. Especially embroidering. It’s not too hard to embroider onto, altho if you tug at the work the felt will, over time distort. The worst is, you probably won’t notice until it’s too late and you’ve done all the hard work. Soooo.. my tip is to work with a piece larger than you intend to use for the end result. That way, the edges you’ve been gripping during any sewing will be trimmed off and you’ll have a lovely neat finish.
If your felt is thin or the acrylic type. You might want to strengthen the overall design by sandwiching a light card in between another piece of the felt. Sew close to the edge of the card. so that it’s trapped inside. A thin layer of PVA glue between the layers is a good idea too.
To finish I topped them with a button, and on my Nan’s, a bit of ribbon from my stash. These are around 6.5″ x 2.5″ in size. The poppy design ended up being a smidge taller due to the script.
The stitches used are, running stitch, satin stitch, back stitch, heavy chain, trellis, split stitch, french knot and fly stitch.
Any questions about these bookmarks are welcome, please comment below!
I’ve been quite busy over the winter months, especially before Christmas. So I have a backlog of stuff I need to post. Most of the things you need for this are tools most people and almost definitely frequent crafters’ will have already.
The wall hanging is made from 2 x A4 chipboard (cardboard), cotton fabric, acrylic yarn and felt. Held together with fabric glue I used PVA glue as it does a good job, also I used some cotton embroidery thread. You’ll also need scissors, a hole punch suitable for heavy card and hammer, pencil, embroidery needle or a large sewing needle, iron, and last but definitely not least a decent craft knife/Stanley blade.
Made for my niece as a Christmas present. I wanted to include her name, Summah. The name is cut out using acrylic felt because it was what I had in my stash. But you could use any you have.
Draw out yourself a cloud design. To make it as even as mine you can cheat like I did and draw around something =] .
I used a plate and something else small I can’t remember, maybe a cookie cutter to draw the rainbow. You could just use a rectangle though instead of a rainbow shape. Cut both out with a blade.
At this point make sure you mark evenly according to the weight balance of your shapes the wholes and don’t punch them too close to the edge as it will not work very well. Important – Keep the bits you punch out. You’ll need them afterwards! Read the rest of this entry
Knitted Gifts Fast
This super chunky knitted scarf took less than a day start to finish. Including figuring the style and making the buttons. The pattern was one I thought of that would work best for this project.
You can use any alternatives but these are what I used and would bode best for this pattern. Plus the quality of the yarn speaks volumes on this project. Ideal as a winter time gift.
Dimensions 7.5″ x 28″
What you need
1 x ball of Sirdar Denim Ultra Wool (super chunky)
8mm Knitting Needles
3 x 15-18mm Odd but similar sized buttons with preferably 4 sewing holes.
Small piece of colour coordinating Wool Felt to cover buttons
Needle and thread
Using the 8mm knitting needles
Cast on 18 sts
(Rib pattern row)
[Row 1 -K2, P2 until last 2 stitches, K2]
[Row 2 -P2, K2 until last 2 stitches, P2]
knit Row 2 of rib pattern
knit Row 1 of rib pattern
(Body of scarf)
(right side row)Knit row
P2, K14, P2
K2, P14, K2
Continue scarf body pattern until you reach 26″ ending on a wrong side
Knit Row 2 of rib pattern
Knit Row 1 of rib pattern
Knit Row 1 of rib pattern
Knit Row 2 of rib pattern
Cast off and tie in any ends not weaved in.
The buttons were made using a simple technique. With leftover yarn from the scarf. There should be more than enough if you have good tension.
Cut 3 lengths of yarn at around 8″
3 x 2″ diameter felt circles, or big enough to cover the buttons as pictured.
Tie knots in the centre to make a bobble. Split the yarn so you have 4 tails (see picture below) and thread each through the 4 eyes of the button.
Using small stitches, make a running stitch around circles of felt. Do not knot yet.
Pull slightly on the thread so that it creates a slight dome shape. Place in the prepared knotted wool and button. Pull the thread and make sure the thread covers the back of the button centrally. Tie off the thread after sewing over the felt and yarn to secure the back, as these will be pulled at when used.
Using the picture to help you with placement, use the tails of the buttons to tie onto the rib of the scarf. Making sure they line up with the natural holes created by your stitches.
Personalized Fathers Day Gift
I said I’d update you all on my Father’s Day project for my hubby from my 2yr old son. I started the embroidery yesterday afternoon. I was surprised how quickly it grew. It’s pictured here with the mount i intend to use. I used two shades of a silvery grey. The canvas I used is slightly off-white. But that’s ok, it’s not as contrast as it looks in the picture.
Below is a picture guide to how I went about this. Any suggestions for the bottom right hand corner would be good. Or even if this should be filled in. I did want to reference the year and a father son quote that relates to the hands.
Please let me know what you think below.
A Birthday Gift for my Mother
If you remember an earlier post about me going to the craft fair in Birmingham. I posted about purchasing lots of wool roving, silk and embroidery threads along with a few other things. Well, this is one result of this shopping spree. Let me know what you think below with a comment. I love to hear peoples opinions!
I was inspired by some of the work created by the people who run 21st Century Yarns. I created my own bag pattern to work from, and for anyone who knows me, would know how much of a perfectionist I am when it comes to planning and executing my craft projects. It took me a while to figure out how I wanted it to look. In the end I was very happy with this design. Although if I could change one thing I would have added even stiffer interfacing. I did think it would be heavy enough though. Something to learn from I guess.
As you can see by the pictures, I used my machine to fix the threads that I layered over the cotton fabric. I took time to make sure the placement was right. I used a wide silver coloured ribbon as an added accent which I really love. The background layer is calico that has been dyed in different tones. The colours are subtle but really work well. It’s lined with a silver coloured hand woven silk that I picked up from a different stall.
I am going to make a cushion in this similar fashion. Except I’m going to work in wool felt to add a bolder texture. This will be in a red/plum and a selection of greens. Any questions about my crafts are welcome! Happy Crafting!
Quick Cactus Egg Cosy
If you would like to try this project here are the directions to make one cosy.
What you’ll need
2.5″ x 9″ Green Felt
Scraps of Coloured Felt for the Flower
Selection of Embroidery Thread in Beige and another coloured thread.
45 Silver Lined Sead Beads or whatever colour you would like
Felting Needle will help with the hand sewing, they are pyramid-shaped.
Cut out 3 arches that measure 3″ in width and 2.5″ in height. These templates should print out to size. Read the rest of this entry
Make a pincushion
I was asked to make a pincushion for my Aunt. Her favourite colours are black and white so that gave me my starting block. I think choosing fabric, is sometimes the hardest bit. I knew how I wanted it to look, so I winged it from there.
This is a rough guide to how it was made. It really is a simple design tho, let me know if you try this.
What you’ll need
½ metre (roughly) Ribbon
1 or 2 Buttons
2-3 Different Patterned Fabric (I used quilting cotton)
3.5″ square of Felt (any colour, but try not to be too contrasting if you can see it through the fabric)
Coordinating Sewing thread
Quilting Square (optional, but easier)
Read the rest of this entry
This huge exhibition has so many talented artists and many interesting crafts to explore.
My favourite stall holder was 21st Century Yarns, with their hand dyed yarns and cloth. I am going to be using these threads for a few different projects. A silk embroidered hand/clutch bag, an embellished cushion.
I also purchased some 100% cotton yarn, hand dyed in Chile by Araucanía Yarns. It’s a smooth thick yarn, pictured in blue, black and green. Can’t wait to make myself and my son a snuggly scarf with the lush one-off hanks. Each one sold creates more opportunities for the local people of Chile, bringing new skills, jobs and hope fr the future.
Check back here soon to see what I make of these super lush fabrics.
Enhancing a simple knit scarf
A little project I was asked to do was to jazz up this hand knit scarf. A few sequins and beads later I came up with this. It’s quite a trend to have sequins sewn onto knitted accessories so for sure this is not ‘new’. But if you do this yourself it will definitely be unique.
To do this technique tie your sewing thread to the scarf where you would like the sequin. Thread your sequin and bead onto the needle and push to the fabric. Thread the needle back through the sequin and tie off below. Try not to go too deep through the scarf as you don’t want the thread showing on the other side. If your sequins aren’t too spaced you can do more than one at a time by threading your cotton through the scarf so that it can’t be seen. Do several of these and tie off securely.
Add some tassel with leftover yarn from your project. Add in a bit of coloured yarn to tie in the colours and you have a completely overhauled scarf!
Valentines Personalized Magnet
What could be more manly than a magnet? Ok, maybe a few things, but as far as valentines go, there isn’t much choice for men. Men, in general, don’t really care about flowers, chocolates and cute teddy bears. So I decided to make a magnet for my hubby.
It was a relatively easy as far putting it together. If you have a crafty stash this will be an ideal project to use those scraps and odd ends up.
Small scraps of lightweight fabric
Iron-on fusible webbing
Buttons or embellishments
Polyester toy stuffing
2 – 12mm dia x 3mm thick – (110 grams pulling force each)
Sewing Machine (optional)
Cut out two heart-shaped pieces of fabric, they don’t have to match. You can experiment with different colours or just use a plain coloured fabric on the back.
Print out a name or a word you want used on the heart, such as; love, xoxo, ur gr8, txt me, nicknames would work great too, etc. What word you use all depends on the size you choose to do. Remember the larger the piece the stronger the magnet you need. To be safe, I used two on mine.
Cut out the letter on fusible webbing and arrange them on your hearts. Make sure you leave room for your seam. ¼″ is usually enough. Press for a couple seconds, long enough for it to bond.
Sew the magnets on the inside of the back heart fabric. I don’t have a picture but just sew over the magnets until they are trapped in a web of thread. This way you won’t have magnets showing or messy glue to deal with.
Here is detail of the back so you can see how it looks with the magnets sewn in.
Next you will want to embellish the front of your heart with little ‘X’s’ and ‘O’s’. I used tiny buttons as ‘O’s’ and threaded them on using a coloured embroidery thread. You can embroider anything you feel right to your valentine.
Turn the right sides of the two heart pieces together. Pin to secure and sew straight stitch to seal, remember when you sew up to leave at least an inch so you can turn it out after. I recommend leaving the gap on the straight edge of the heart so it will be easier to sew up. For best appearances trim the inside corners and curved edges, where the fabric is likely to make the outside look crumpled.
Stuff as much stuffing as you would like inside into your mini cushion shape. Sew up the gap.
You’re done! An intermediate sewer could do this within the hour too!
How to make an easy no zip cushion cover
A no zip cushion is not only super easy but super safe for toddlers as they can’t scratch their faces on it. Here’s how I put this together.
I found that it was more expensive to buy the oblong shaped cushion inner than a larger square one. So I thought I’d just make one myself from one square inner.
For this cushion I took an Ikea INNER inner cushion 50cm x 50cm (20×20 Inches) and halved it so I could make two cushions for my sons toddler bed. To do this you can mark the centre with a pen both sides. Using running stitch follow the line you’ve drawn and tie off. This will help squish the poly fill down so you can run a machine over it. Make a channel using the line as a guide and cut down the centre of this channel sealing and separating the two halves.
If using different inner cushions for this project you need to measure the longest side and double this number and add 5 inches to get the length of material you will need. Then measure the shortest and add 0.5 inches this will be your width. Otherwise follow the measurement below. I always use a ¼ Inch seam allowance. All my measurement include this unless stated.
43″ x 10″ Piece of Fabric of your choice (includes enough for an overlap)
Sewing Machine (optional, but would be quicker)
Double over the hem on the 10″ end as pictured. Pin in place. Repeat on the other end of the fabric so both ends are the same. This should cut the length to 42″.