I had lots of the fabric leftover from the dress project. So I figured a skirt wouldn’t go a miss! Nor would a matching hair bow! Check out the pictures below. Super simple elasticated waist. For a 14 Month old I had a 19″ waist and 7″ length for above the knee. I’ll be posting another project that I have done putting more of this fabric to use. It was originally bought to match a custom made cloth nappy my niece had. One metre of fabric has gone a long long way, and there is still more of it left!
This gallery contains 3 photos.
As in the previous post, I have made another dress, but in the next size 18 Months. No pattern because it’s just a large rectangle of fabric for the skirt and as I’ve said before, I used the crochet pattern from here. I thought I’d post as another idea for fabrics you can use.
So pleased with how this turned out. Considering I had just a picture in my mind of how I wanted it to look. I scoured the web for a free crochet pattern for the yoke of the dress as I wasn’t prepared to wing this bit. Plus, it’s been a while since I had a 11 month old to judge the size.
You can go HERE for the crochet part. The rest of the dress I did wing. The skirt part measures 10.5″ incase that’s helpful in sizing. Chest/Waist is 19-20″. This is to fit a 9-12 Month baby. (They also provide instructions for 18 months and 2 years.) However, I just used a length of fabric that I had already. This worked out to just enough to create a few pleats to give the fullness to the skirt. Basically you just have to hem and sew on a panel to the bottom of the crocheted bodice. This could be large pleats like mine or small pin tucks. Depending on what look you wanted. Just measure them as you go around and pin them into place. I recommend a deep hem on the skirt as these press better to create a nice pleated finish when ironed.
I finished it with coordinating ribbon and buttons. The little heart pocket on the skirt is also part of the free crochet pattern. I just threaded a bit of ribbon through the holes and secured it with sewing thread. Always remember to seal off the ends of your ribbon when using it like this tho. You don’t want it ruined with one wash. I used poppers on the back as a fastening, but you could probably utilize the natural holes in the crochet to use small buttons. Just test the buttons first by pushing them through.
You will need 4mm crochet hook and Lightweight cotton DK yarn. Also, at least 150% of the width of the bodice in fabric length to make the skirt. Preferably 200%. Matching sewing thread of course, and at least 3 snaps or buttons for fastening. Everything else is really optional. Just use your imagination! =D
I’ve been getting my groove on with polymer clay lately. I’ve only made a couple of little charms and such but I’m really liking it. I did buy myself polymer clay some time ago now, but I never got around to making anything with it. Whether I was scared to use up the cool colours, or just plain outta inspiration, I don’t know. I have a tendency to hoard favourite craft items for ‘something amazing’ and never end up using them. So I was determined to actually use the stuff, rather having it rot inside a box!
I was really surprised that my Fimo had not actually dried up. So I thought I’d share with you a charm I made for my son’s school rucksack. I used two different blues to get the right tone and mixed it 1:1 with transparent clay. I think I should have used a lot more transparent tho. I did however apply a coat of liquid Fimo clay. The ankh was drawn on afterwards with a blue promarker.
So my son is obsessed with Skylanders! But you can’t find any patterns for anything related to this game. So I decided to try to crochet him a Chompy, the small critter that features in the game. So, forgive me if this pattern is not 100% accurate as this is my first toy crochet pattern. The single crochets refer to the US version. If you have any problems with the instructions, please leave a comment or contact me and I’ll fix it/advise you. The teeth and fingers are just cut out from felt and sewn in. The eyes are just embroidered with a satin stitched.
Have fun with this little guy, it didn’t take too long to wip up, and uses less than half a ball of green dk yarn (100g), so leftovers would probably work.
He stands at 8″ high, including his eyes.
Each new line depicts a new row or round.
sc = single crochet
sc2tog = Single crochet 2 stitches together
ch = chain
sc2 in nxt = Increase
dcr = decrease
3.5 hook Hayfield Bonus DK yarn Shade 0886 100g Ball
Yarn colours needed Green, Red and Black.
Small felt pieces in green and white.
Hands Make 2
Ch16, sc into 1st chain to make a circle (now work in rounds)
sc round x2 (16 sts)
*sc2tog, sc2, *repeat to end (12sts)
sc2tog, sc2, repeat to end (9sts)
sc round x2
Flatten and sew in felt fingers using the picture as a guide.
Stuff and set aside
Feet Make 2
Magic circle 6 sts
2 sc in next each st. (12 sts)
*1sc, 2 sc in next st, *repeat to end (18sts)
sc2tog, sc 1, sc2tog, sc 1, sc2tog, sc 10.(15 sts)
sc 15. rows x4
*sc2tog, sc 3. *repeat x2. (12sts)
sc2tog, sc2, repeat x3 (9sts)
2sc in every st to end of row (18 sts)
*sc 1, 2sc in next st, *repeat to end (27 sts)
tie off 1st but not second.
Stuff and set aside
Check out this free pattern on Ravelry. It’s SO freaking cute, it’s not too difficult, but I wouldn’t recommend it for beginners. The original pattern does not come with the wings pictured as I added those myself. If you’d like to add them too I have included the instructions in this post below. Enjoy!..
Wings – 3.5 Hook (Make 2)
Sc in 1st chain, skip 1 ch, sc in next 15 to end, ch2 turn.
Skip 1 st, sc in next and following 10sts
Slip st in next st, ch2, turn.
Skip 1 st, sc in next and following 3 sts.
chain 1, work 3 dc popcorn st in next stRepeat x5 .. Chain3, turn.
Make 3 Trebles in spaces between the popcorn sts already made below, slip st inside next popcorn st belowRepeat x3
Tie off + Sew on ..OR.. Slip st straight onto side of the body along top edge of the wing.
On the second wing you will want to push the popcorn stitches out the opposite way to the first wing. So you get a pair, and not two the same.
Dinosaur costume from a t-shirt
This is an on going project so I’ll be posting as I’m going. Excuse the photos there hasn’t been much good light and I’m posting using my iPod touch. I’ll add more pictures and descriptions of my progress. To be quite honest there is no ‘plan’ per-say. But it’s for my sons birthday party at the weekend.
Reusing t-shirts that are going to be outgrown soon us an ideal way to get a costume started. This one is more of a vest as it has no sleeves, but any type would do!
Now I’ve started to add the spines , which are actually different sized ‘house’ shapes. And are stuffed with toy filler. As they are sewn so the bottoms are opened up, it pulls in the sides of the ‘house’ shapes and gives more of a stegosaurus shape.
Sooo pleased with this!
A little project just for me. I just couldn’t resist making myself this cute head band. The swan itself was drawn by myself, transferred onto felt and embellished with a lace ‘half’ yo-yo’, then decorated with seed beads. Other decorations I added were some little vintage black buttons, bugle beads and faceted glass beads. For the eye I used a vintage green Mother of Pearl button with a fish eye design. I embroidered a simple trellis on the chest too.
I’m so pleased with this, I’m going to make a few more animal designs. Next I want to try an octopus, I think this will look great too in those white and dirty vintage creams and off pinks. *squeals* can’t wait!
Oh, and to top it off.. I’m going to the NEC in Birmingham to the Sewing for Pleasure Craft Event at the end of March! Will be buying loads of fabric goodies and crafting essentials.
Let me know what you think of my head band below! Happy Crafting. =]
Gift for an avid reader!
These 2 bookmarks were made for my Grandparents. My Grandad is a WWII veteran and his father was in WWI. So a gift to show we still remember what they gave was lovingly received. My Nan, she just loves her flowers. At a risk of being boring or predictable, I designed a Peony flower in a Jacobean style. I guess it could also pass for a rose too. However, I thin it worked out looking nice. Let me know what you think below in the comments!
I want to share some tips with you about working with felt. Although I’m a relative newcomer to felt. I have taken some time working with it. Especially embroidering. It’s not too hard to embroider onto, altho if you tug at the work the felt will, over time distort. The worst is, you probably won’t notice until it’s too late and you’ve done all the hard work. Soooo.. my tip is to work with a piece larger than you intend to use for the end result. That way, the edges you’ve been gripping during any sewing will be trimmed off and you’ll have a lovely neat finish.
If your felt is thin or the acrylic type. You might want to strengthen the overall design by sandwiching a light card in between another piece of the felt. Sew close to the edge of the card. so that it’s trapped inside. A thin layer of PVA glue between the layers is a good idea too.
To finish I topped them with a button, and on my Nan’s, a bit of ribbon from my stash. These are around 6.5″ x 2.5″ in size. The poppy design ended up being a smidge taller due to the script.
The stitches used are, running stitch, satin stitch, back stitch, heavy chain, trellis, split stitch, french knot and fly stitch.
Any questions about these bookmarks are welcome, please comment below!
Free Knitting Pattern for a Doll 17″ Tall
3mm Needles – 4 ply yarn
Make 2 c/0 34sts
k2, p2 to end
p2, k2 to end
k2, p2 to end
p2, k2 to end
(Knit Row, Purl Row) x 5
k4, k2tg, k8, k2tg, k8, k2tg, k5, k2tg, k1
k4, k2tg, k4, k2tg, k6, k2tg, k4, k2tg, k4
k2, k2tg to end
k2tg to end
Cut yarn leaving 6 inches of thread, use this to thread through the loops remaining on the needle using a darning needle. Pull Tight and knot. Fold to join edges right sides together and sew up the seam. Additionally you, so they don’t get easily lost. Braid, or using a crochet hook create a chain long enough for your doll and tie to each wrist of the mittens. Thread through the clothing of the doll, just like you would for a child.
Hope you have fun knitting these easy cute mittens! They make a lovely gift, I will be posting more patterns for 17″ dolls soon.
Suitable for Chou Chou, Baby Annabell, Walk and Learn Doll and dolls of similar size.
I’ve been quite busy over the winter months, especially before Christmas. So I have a backlog of stuff I need to post. Most of the things you need for this are tools most people and almost definitely frequent crafters’ will have already.
The wall hanging is made from 2 x A4 chipboard (cardboard), cotton fabric, acrylic yarn and felt. Held together with fabric glue I used PVA glue as it does a good job, also I used some cotton embroidery thread. You’ll also need scissors, a hole punch suitable for heavy card and hammer, pencil, embroidery needle or a large sewing needle, iron, and last but definitely not least a decent craft knife/Stanley blade.
Made for my niece as a Christmas present. I wanted to include her name, Summah. The name is cut out using acrylic felt because it was what I had in my stash. But you could use any you have.
Draw out yourself a cloud design. To make it as even as mine you can cheat like I did and draw around something =] .
I used a plate and something else small I can’t remember, maybe a cookie cutter to draw the rainbow. You could just use a rectangle though instead of a rainbow shape. Cut both out with a blade.
At this point make sure you mark evenly according to the weight balance of your shapes the wholes and don’t punch them too close to the edge as it will not work very well. Important – Keep the bits you punch out. You’ll need them afterwards! Read the rest of this entry
The stats helper monkeys at WordPress.com mulled over how this blog did in 2010, and here’s a high level summary of its overall blog health:
The Blog-Health-o-Meter™ reads This blog is on fire!.
A Boeing 747-400 passenger jet can hold 416 passengers. This blog was viewed about 7,100 times in 2010. That’s about 17 full 747s.
In 2010, there were 46 new posts, not bad for the first year! There were 148 pictures uploaded, taking up a total of 25mb. That’s about 3 pictures per week.
The busiest day of the year was March 25th with 141 views. The most popular post that day was FujiFilm finepix – Knitted Camera Case Free Pattern.
Where did they come from?
The top referring sites in 2010 were toponlineengineeringdegree.com, ravelry.com, facebook.com, en.wordpress.com, and marianaknits.wordpress.com.
Some visitors came searching, mostly for flower outline, http://www.angelbear.org.uk, mickey mouse cake, flower template, and mickey cake.
Attractions in 2010
These are the posts and pages that got the most views in 2010.
FujiFilm finepix – Knitted Camera Case Free Pattern February 2010
Mickey Mouse Clubhouse Theme Birthday Cake – How to May 2010
Easy – No Zip – Cushion Cover February 2010
Personalised Knitted Baby Bib January 2010
Angel Bear – Knit bears for UK Children – Charity February 2010
Not as easy as they look!
I made it my mission to make some Minnie mouse cake pops. However, I didn’t anticipate this to be as frustrating as it was. With the overall waiting for the cake to cook, fair enough, but there was soooo much waiting for things to cool, set or cook. I was getting rather tired of doing them.
I followed instructions from another website that sounded like they had it in the bag. I started out with 20 cake pops. After lots of hassle with them staying on the stick I went through several techniques in coating these little babies in chocolate. I knew I couldn’t just dunk and pull it out all fresh-as-you-like. Cause the weight of the chocolate would rip the cake ball apart and stay put in your nice bowl of melted chocolate.
In the end the best technique I found was to use a heat proof silicone pastry brush and slowly coat the balls supporting the ball underneath with your hand so it didn’t shift down the stick. Place on its head on grease proof paper and don’t move it until it’s set. You won’t need to refrigerate for it to set. Plus it attracts condensation if you do.
Once I had a thin layer on and it had set and could be peeled from the paper. I was able to coat allot easier due to the chocolate acting like glue and it (mostly) stayed put. Your next layer of chocolate should include placing the ears on. I used chocolate buttons. Don’t bother trimming the side off like some websites tell you. This only inhibits the attaching part, which frankly is quite important! =D Push the ears in after the second coat of chocolate, as this will soften the previous layer just enough to help with that. Otherwise they just break up! These are then to be stood up on their sticks to set, a block of Styrofoam is useful here. A useful tip I did pick up is to make use of a cocktail stick. Just to pick define areas like the ears and to move the chocolate and to remove any excess. I coated mine until I was happy with them. Or at least, not so disappointed!
You only need to make them around 1 inch diameter at first, as the chocolate layers bulk them out. I was worried I wouldn’t get them inside the cellophane bags I had that were 3.5″x5″ I bought from Ebay. I chose 4.5″ lolly sticks or the plastic variety, if they don’t come with, you will need some plastic coated wires too to seal them. On my travels around my local town of Cannock, I picked up some lovely ribbon the I thought was just right, at 20p a meter I wasn’t complaining!
I just cut the ribbon a few inches long and tied once tightly. You could, with thinner ribbon tie a bow. But at this point in the baking and making process, I was ready to give up altogether. In the end, I managed to salvage 11 decent looking Minnie silhouettes. They didn’t taste bad at all either. My 2.5yr old son was happy to eat any disaster pops. Although to be fair they were very rich, so don’t worry if you don’t make a lot. I probably wouldn’t eat more than one at a time.
Overall, I’m happy I gave it a go, but I won’t be in a hurry to try this again. Maybe plain round ones with decoration on top to disguise the dodgy coating of chocolate. Let me know if you have tried this and how it worked out.
Knitted Gifts Fast
This super chunky knitted scarf took less than a day start to finish. Including figuring the style and making the buttons. The pattern was one I thought of that would work best for this project.
You can use any alternatives but these are what I used and would bode best for this pattern. Plus the quality of the yarn speaks volumes on this project. Ideal as a winter time gift.
Dimensions 7.5″ x 28″
What you need
1 x ball of Sirdar Denim Ultra Wool (super chunky)
8mm Knitting Needles
3 x 15-18mm Odd but similar sized buttons with preferably 4 sewing holes.
Small piece of colour coordinating Wool Felt to cover buttons
Needle and thread
Using the 8mm knitting needles
Cast on 18 sts
(Rib pattern row)
[Row 1 -K2, P2 until last 2 stitches, K2]
[Row 2 -P2, K2 until last 2 stitches, P2]
knit Row 2 of rib pattern
knit Row 1 of rib pattern
(Body of scarf)
(right side row)Knit row
P2, K14, P2
K2, P14, K2
Continue scarf body pattern until you reach 26″ ending on a wrong side
Knit Row 2 of rib pattern
Knit Row 1 of rib pattern
Knit Row 1 of rib pattern
Knit Row 2 of rib pattern
Cast off and tie in any ends not weaved in.
The buttons were made using a simple technique. With leftover yarn from the scarf. There should be more than enough if you have good tension.
Cut 3 lengths of yarn at around 8″
3 x 2″ diameter felt circles, or big enough to cover the buttons as pictured.
Tie knots in the centre to make a bobble. Split the yarn so you have 4 tails (see picture below) and thread each through the 4 eyes of the button.
Using small stitches, make a running stitch around circles of felt. Do not knot yet.
Pull slightly on the thread so that it creates a slight dome shape. Place in the prepared knotted wool and button. Pull the thread and make sure the thread covers the back of the button centrally. Tie off the thread after sewing over the felt and yarn to secure the back, as these will be pulled at when used.
Using the picture to help you with placement, use the tails of the buttons to tie onto the rib of the scarf. Making sure they line up with the natural holes created by your stitches.
Knitted Gifts for Kids
I made this dinosaur from a magazine pattern, I forget which one, in September. It’s taken me a while to post on here as I’ve had a few distractions keeping me away. The magazine also features another dinosaur and can be knitted in any colours you like, even girly pinks and purples. My dear son loves this dino, and takes it to bed with him!
You can buy poly stuffing quite cheaply. This was an easy pattern, however it did seem like an eternity sewing up all those ends for the back plates. But was fun and glad I gave it a go.
Remember to always be extra careful sewing up toys for toddlers as they can be quite rough and tough on your knitted gift. Use a crochet hook to pull all the loose ends into the toy and firmly into the stuffing.
If you gave this pattern a go, let me know how you got on, I’d love to see the different colours you used. I used Hayfield fantasy in the green tones with orange and yellow toy yarn for the plates and spots.
A Birthday Gift for my Mother
If you remember an earlier post about me going to the craft fair in Birmingham. I posted about purchasing lots of wool roving, silk and embroidery threads along with a few other things. Well, this is one result of this shopping spree. Let me know what you think below with a comment. I love to hear peoples opinions!
I was inspired by some of the work created by the people who run 21st Century Yarns. I created my own bag pattern to work from, and for anyone who knows me, would know how much of a perfectionist I am when it comes to planning and executing my craft projects. It took me a while to figure out how I wanted it to look. In the end I was very happy with this design. Although if I could change one thing I would have added even stiffer interfacing. I did think it would be heavy enough though. Something to learn from I guess.
As you can see by the pictures, I used my machine to fix the threads that I layered over the cotton fabric. I took time to make sure the placement was right. I used a wide silver coloured ribbon as an added accent which I really love. The background layer is calico that has been dyed in different tones. The colours are subtle but really work well. It’s lined with a silver coloured hand woven silk that I picked up from a different stall.
I am going to make a cushion in this similar fashion. Except I’m going to work in wool felt to add a bolder texture. This will be in a red/plum and a selection of greens. Any questions about my crafts are welcome! Happy Crafting!
Stash Buster Project
So, I was given a free book of crochet patterns. It was from the May 2010 ‘Let’s Knit’ Issue. I hadn’t picked up a crochet hook for a long time. Since I struggled to complete a blanket for my unborn son at the time. But as this seemed quite quick, I referred to my ‘how to’ book of crocheting and finished it in a flash! These would make excellent stocking fillers. You could easily convert them to look Christmas-ee. Sorry I mentioned the ‘C’ word already. But hey, you gotta be prepared. So many crafting options, so little time.
The beads I used were glass, but I should have used more or chosen a heavier bead so that they would weigh it down to bring out the shape better. You could, of course, use any colour combination. I just used what I had, and I just happened to only have white in 4 ply. The suggest you can use ribbon, but you could use any yarn you like. Just choose an appropriate hook and if your yarn or yarn substitute is much thicker then make reduce the amount of rounds you make.
If you missed this issue and would like to get this pattern. It can be found in the book ‘Two Balls or Less’ by Jenny Hill. It’s RRP is about £12.99 and has over 30 simple crochet and knitting projects.
As an added note, the hook used is 3.5mm.
Fusing Plastic, is not so, fantastic!
Armed with my plastic bag supplies, which consist of Asda, Superdrug and Card Factory. Chosen mainly for their colours. Green and Pink =D . I followed the guides of the likes on youtube.com but it didn’t really go all that well. I think I may have had my iron on too high. Although, some tutorials were saying you need 8 ply, others were saying that’s not necessary, and that you can have the iron on full, others on a wool setting. Other than the slight difference in opinions, I thought that the general ‘rules’ of fusing the plastic were fairly easy.
I did start with a cool setting, such as the wool temp on my iron. I used the recommended baking paper and made sure the inked side of the plastic was always topped by another plastic to stop bleeding.
A few passes with the iron on Wool for about 15-20 seconds, but it seemed to do nothing at all. So I turned up the dial and it seemed as though the plastic just didn’t want to fuse together.
Until… it all went horribly wrong and started to shrink at a rapid rate. You can see my results below. Any tips would be great. I really would like another crack at this. As I’d like to make myself a knitting bag using the ‘plastic fabric’. But at the moment. I’m passing this one by. Like I said, any tips on where I may have gone wrong. Also, there doesn’t seem to be much guide on whether some plastics don’t like other plastics and just WON’T fuse together, rather melt upon each other leaving air pockets galore, like in my case. I was disappointed with the results overall, but I did like the composition. You live and learn!
I also wanted to experiment with yarn fibres fused inside. If anyone’s had success with this (or not), please let me know.
Knitted Hair Bow
Hope you like my latest crafty project. Including the time to figure out the pattern and write it down, this took about 10 minutes. It can be attached to any kind of hair accessory base. Hair clip, band, barrettes, slide, …you get the idea.
The yarn I used was a random ball from my stash. I’m not entirely sure of the yarn type but it is very similar to kid mohair. It felts very easily, but this will only help stabilize the design.
The pattern I used is below. Let me know if you use it. I’d love to see your take on it. Btw, I use standard abbreviations in my patterns. So you can refer to any knitting magazine or book if you’re not familiar with the terms.
Kfb = Knit into the front and back of stitch. This increases your row.
What you’ll need
10mm Knitting Needles
Mohair or similar yarn
Hair accessory base
C/o 2sts (make sure you leave at least an 8in tail, this is used to attach your button later, and used to attatch to your hair accesories)
1- kfb, kfb [4sts]
2- kfb, k2, kfb [6sts]
3- k2tg, k2, k2tg [4sts]
4- k2tg, k2tg [2sts]
5- k2tg [1st]
Keep last st on needle
Repeat Rows 1-5, cut yarn leaving 8in to fasten off, threading back through to the centre of the bow with both tails.
Position button in the middle of your bow and sew on using the tails of yarn. Pull tight and secure at back.
To attach to your clip or slide, use a multi-purpose glue that sticks fabric and metal, HT2 would be a good choice.