Tag Archives: disney

Winnie the pooh themed wall hanging nursery decoration personalized

Standard

Handmade Gift

Front - Click to enlarge

I’ve been quite busy over the winter months, especially before Christmas. So I have a backlog of stuff I need to post. Most of the things you need for this are tools most people and almost definitely frequent crafters’ will have already.

The wall hanging is made from 2 x A4 chipboard (cardboard), cotton fabric, acrylic yarn and felt. Held together with fabric glue I used PVA glue as it does a good job, also I used some cotton embroidery thread. You’ll also need scissors, a hole punch suitable for heavy card and hammer, pencil, embroidery needle or a large sewing needle, iron, and last but definitely not least a decent craft knife/Stanley blade.

Made for my niece as a Christmas present. I wanted to include her name, Summah. The name is cut out using acrylic felt because it was what I had in my stash. But you could use any you have.

Directions
Draw out yourself a cloud design. To make it as even as mine you can cheat like I did and draw around something =] .

I used a plate  and something else small I can’t remember, maybe a cookie cutter to draw the rainbow. You could just use a rectangle though instead of a rainbow shape. Cut both out with a blade.
At this point make sure you mark evenly according to the weight balance of your shapes the wholes and don’t punch them too close to the edge as it will not work very well. Important – Keep the bits you punch out. You’ll need them afterwards! Read the rest of this entry

My Mission – Minnie Mouse Cake Pops – Birthday Gift

Standard

Not as easy as they look!

Cute and tasty!

I made it my mission to make some Minnie mouse cake pops. However, I didn’t anticipate this to be as frustrating as it was. With the overall waiting for the cake to cook, fair enough, but there was soooo much waiting for things to cool, set or cook. I was getting rather tired of doing them.

I followed instructions from another website that sounded like they had it in the bag. I started out with 20 cake pops. After lots of hassle with them staying on the stick I went through several techniques in coating these little babies in chocolate. I knew I couldn’t just dunk and pull it out all fresh-as-you-like. Cause the weight of the chocolate would rip the cake ball apart and stay put in your nice bowl of melted chocolate.

In the end the best technique I found was to use a heat proof silicone pastry brush and slowly coat the balls supporting the ball underneath with your hand so it didn’t shift down the stick. Place on its head on grease proof paper and don’t move it until it’s set. You won’t need to refrigerate for it to set. Plus it attracts condensation if you do.

Once I had a thin layer on and it had set and could be peeled from the paper. I was able to coat allot easier due to the chocolate acting like glue and it (mostly) stayed put. Your next layer of chocolate should include placing the ears on. I used chocolate buttons. Don’t bother trimming the side off like some websites tell you. This only inhibits the attaching part, which frankly is quite important! =D Push the ears in after the second coat of chocolate, as this will soften the previous layer just enough to help with that. Otherwise they just break up! These are then to be stood up on their sticks to set, a block of Styrofoam is useful here. A useful tip I did pick up is to make use of a cocktail stick. Just to pick define areas like the ears and to move the chocolate and to remove any excess. I coated mine until I was happy with them. Or at least, not so disappointed!

You only need to make them around 1 inch diameter at first, as the chocolate layers bulk them out. I was worried I wouldn’t get them inside the cellophane bags I had that were 3.5″x5″ I bought from Ebay. I chose 4.5″ lolly sticks or the plastic variety, if they don’t come with, you will need some plastic coated wires too to seal them. On my travels around my local town of Cannock, I picked up some lovely ribbon the I thought was just right, at 20p a meter I wasn’t complaining!

I just cut the ribbon a few inches long and tied once tightly. You could, with thinner ribbon tie a bow. But at this point in the baking and making process, I was ready to give up altogether. In the end, I managed to salvage 11 decent looking Minnie silhouettes. They didn’t taste bad at all either. My 2.5yr old son was happy to eat any disaster pops. Although to be fair they were very rich, so don’t worry if you don’t make a lot. I probably wouldn’t eat more than one at a time.

Click to enlarge

Click to enlarge

Overall, I’m happy I gave it a go, but I won’t be in a hurry to try this again. Maybe plain round ones with decoration on top to disguise the dodgy coating of chocolate. Let me know if you have tried this and how it worked out.

Mickey Mouse Clubhouse Theme Birthday Cake – How to

Standard

Mickey is number one!

Mickey Cake

For my son’s first birthday (last year) I baked him a Mickey Mouse theme cake. I used 9″ and 6″ cake tins to do this 2 tier cake.

I baked the cake base using this recipe or you could choose your own. You only need 1 and half times the recipe. One for the bottom and half is for the top. I halved my tiers and layered butter cream in the centre. You wouldn’t need to do this. But you will need to make a batch of butter cream to ‘stick’ the fondant to the cake.

To get the top cake, not to sink into the other cake while it’s on top, cause that just wouldn’t be pretty! Use 3 or 4 cut down straws or wooden skewers to the height of the fondant layer. Rest your cake on its own 6″ base or if using a different size tins it should measure the same as your cake so you can’t see it. It will be easier to remove it after for cutting that way. The bottom layer should probably have one at least an inch larger base than the bottom layer cake.

Ok, so you’ve baked your cake and let it cool, added butter cream to the outside and you’ve rolled out the fondant and placed it neatly over the top. Once it’s all smooth and square with the cake, you’ll want to start decorating. I only used supermarket fondant that is fairly cheap, but tasty. With the white you can also dye it any colour you like using gel colours. For mine I’m sure I used Ruby Red, Violet, and Christmas green and licorice black. Of course with any dying process you will have to add a bit at a time to get the colour you want.

The best technique I’ve found for blending the colour the best is by making a well in the white fondant ball and using a cocktail stick to control how much I put in. Place in a small amount and close the well up so the dye is inside. This will help stop the majority of the dye getting straight all over your hands. Cause it doesn’t come off your hands easily. Now roll, just using your hands, the ball into a sausage shape. You want it to be long enough to turn back on itself. Now just rinse and repeat until it is all blended. This method will help stop it sticking all on your hands too. If you add too much dye, try adding icing sugar powder to soak up the extra moisture. Now let the coloured icing sit aside and cool down. You could now dye another batch and so on. Once you have all the colours you want, return to the first colour as it should have cooled enough. Don’t leave it a long time or it will start to dry out. If you plan to use it later that day you can wrap it in cling film to stop it from drying up.

I used letter fondant cutter for his name. The Mickey heads were about 1.5″ in diameter. If you don’t have a tiny cutter for his ears (assuming you don’t just have a mickey mouse cutter) you can roll a small piece into a ball and press into shape straight onto the cake. You may want to test your sizing before going straight to the cake and make all your ear balls before applying them so they are uniform in size.

A way to get your fondant shapes to stick is to use an edible glue or make your own by using good spoon full of icing sugar and add drops of water until a glue consistency. Remember though, it takes more sugar to water to fix it if you put too much water in. So do it gradually.

You can finish of (or hide any messy edges) by using ribbon around the bottom of each layer. Hold in place with a tiny piece of clear tape or like I did using butter cream as a glue.

You should end up with an awesome, but more importantly, handmade cake! Enjoy giving and eating together! Hope you found this guide useful. Let me know if you try this! I love to share others photos too. Post a comment to contact me.

Easy Wall decor – disney cars – boys room

Standard

I am currently overhauling my little boys room. Disney Cars is the chosen theme. Here are some ideas of how to arrange the wall art stickers you can buy. This pack is available at amazon.co.uk Search: Decofun Cars Wall Stickers Room Kit. The wallpaper was purchased from http://rolling-borders.com/

Disney Cars Bedroom Decor

Cars Theme Decoration

Light Switch Decoration

Use any extras on your furniture to tie them in to the Decor