Tag Archives: Felt

Skylanders Chompy Chompie Free Crochet Pattern

Standard

Crochet your own Chompies!

So my son is obsessed with Skylanders! But you can’t find any patterns for anything related to this game. So I decided to try to crochet him a Chompy, the small critter that features in the game. So, forgive me if this pattern is not 100% accurate as this is my first toy crochet pattern. The single crochets refer to the US version. If you have any problems with the instructions, please leave a comment or contact me and I’ll fix it/advise you. The teeth and fingers are just cut out from felt and sewn in. The eyes are just embroidered with a satin stitched.

Have fun with this little guy, it didn’t take too long to wip up, and uses less than half a ball of green dk yarn (100g), so leftovers would probably work.

He stands at 8″ high, including his eyes.

Each new line depicts a new row or round.

sc = single crochet
sc2tog = Single crochet 2 stitches together
ch = chain
sc2 in nxt = Increase
dcr = decrease
PATTERN

Skylanders Chompy

3.5 hook Hayfield Bonus DK yarn Shade 0886 100g Ball
Yarn colours needed Green, Red and Black.
Small felt pieces in green and white.

Hands Make 2
Ch16, sc into 1st chain to make a circle (now work in rounds)
sc round x2 (16 sts)
*sc2tog, sc2, *repeat to end (12sts)
sc round
sc2tog, sc2, repeat to end (9sts)
sc round x2
tie off
Flatten and sew in felt fingers using the picture as a guide.
Stuff and set aside

——–
Feet Make 2

Magic circle 6 sts
2 sc in next each st. (12 sts)
*1sc, 2 sc in next st, *repeat to end (18sts)
sc2tog, sc 1, sc2tog, sc 1, sc2tog, sc 10.(15 sts)
sc 15. rows x4
*sc2tog, sc 3. *repeat x2. (12sts)
sc2tog, sc2, repeat x3 (9sts)
2sc in every st to end of row (18 sts)
*sc 1, 2sc in next st, *repeat to end (27 sts)
sc row
tie off 1st but not second.
Stuff and set aside

Read the rest of this entry

Recycle t-shirt into a dinosaur costume for kids using felt, super easy!

Standard

Dinosaur costume from a t-shirt

20110405-091127.jpg This is an on going project so I’ll be posting as I’m going. Excuse the photos there hasn’t been much good light and I’m posting using my iPod touch. I’ll add more pictures and descriptions of my progress. To be quite honest there is no ‘plan’ per-say. But it’s for my sons birthday party at the weekend.
Reusing t-shirts that are going to be outgrown soon us an ideal way to get a costume started. This one is more of a vest as it has no sleeves, but any type would do!

20110405-161545.jpg
Now I’ve started to add the spines , which are actually different sized ‘house’ shapes. And are stuffed with toy filler. As they are sewn so the bottoms are opened up, it pulls in the sides of the ‘house’ shapes and gives more of a stegosaurus shape.

Black Swan Theme Hair Band Accessory – Using Vintage Buttons, Beads, Felt and Embroidery

Standard

Sooo pleased with this!

Alice Band Black Swan

A little project just for me. I just couldn’t resist making myself this cute head band. The swan itself was drawn by myself, transferred onto felt and embellished with a lace ‘half’ yo-yo’, then decorated with seed beads. Other decorations I added were some little vintage black buttons, bugle beads and faceted glass beads. For the eye I used a vintage green Mother of Pearl button with a fish eye design. I embroidered a simple trellis on the chest too.

I’m so pleased with this, I’m going to make a few more animal designs. Next I want to try an octopus, I think this will look great too in those white and dirty vintage creams and off pinks. *squeals* can’t wait!

Oh, and to top it off.. I’m going to the NEC in Birmingham to the Sewing for Pleasure Craft Event at the end of March! Will be buying loads of fabric goodies and crafting essentials.

Let me know what you think of my head band below! Happy Crafting. =]

Black Swan

Front view

Felt Bookmarks with Embroidery detail and Applique Gift idea

Standard

Gift for an avid reader!

Veteran Remembrance Poppy

Jacobean Peony Flower

These 2 bookmarks were made for my Grandparents. My Grandad is a WWII veteran and his father was in WWI. So a gift to show we still remember what they gave was lovingly received. My Nan, she just loves her flowers. At a risk of being boring or predictable, I designed a Peony flower in a Jacobean style. I guess it could also pass for a rose too. However, I thin it worked out looking nice. Let me know what you think below in the comments!

I want to share some tips with you about working with felt. Although I’m a relative newcomer to felt. I have taken some time working with it. Especially embroidering. It’s not too hard to embroider onto, altho if you tug at the work the felt will, over time distort. The worst is, you probably won’t notice until it’s too late and you’ve done all the hard work. Soooo.. my tip is to work with a piece larger than you intend to use for the end result. That way, the edges you’ve been gripping during any sewing will be trimmed off and you’ll have a lovely neat finish.

If your felt is thin or the acrylic type. You might want to strengthen the overall design by sandwiching a light card in between another piece of the felt. Sew close to the edge of the card. so that it’s trapped inside. A thin layer of PVA glue between the layers is a good idea too.

To finish I topped them with a button, and on my Nan’s, a bit of ribbon from my stash. These are around 6.5″ x 2.5″ in size. The poppy design ended up being a smidge taller due to the script.

The stitches used are, running stitch, satin stitch, back stitch, heavy chain, trellis, split stitch, french knot and fly stitch.

Any questions about these bookmarks are welcome, please comment below!

Appliquéd

Poppy close up

Winnie the pooh themed wall hanging nursery decoration personalized

Standard

Handmade Gift

Front - Click to enlarge

I’ve been quite busy over the winter months, especially before Christmas. So I have a backlog of stuff I need to post. Most of the things you need for this are tools most people and almost definitely frequent crafters’ will have already.

The wall hanging is made from 2 x A4 chipboard (cardboard), cotton fabric, acrylic yarn and felt. Held together with fabric glue I used PVA glue as it does a good job, also I used some cotton embroidery thread. You’ll also need scissors, a hole punch suitable for heavy card and hammer, pencil, embroidery needle or a large sewing needle, iron, and last but definitely not least a decent craft knife/Stanley blade.

Made for my niece as a Christmas present. I wanted to include her name, Summah. The name is cut out using acrylic felt because it was what I had in my stash. But you could use any you have.

Directions
Draw out yourself a cloud design. To make it as even as mine you can cheat like I did and draw around something =] .

I used a plate  and something else small I can’t remember, maybe a cookie cutter to draw the rainbow. You could just use a rectangle though instead of a rainbow shape. Cut both out with a blade.
At this point make sure you mark evenly according to the weight balance of your shapes the wholes and don’t punch them too close to the edge as it will not work very well. Important – Keep the bits you punch out. You’ll need them afterwards! Read the rest of this entry

Knitted Cowl / Buttoned Scarf – How to – using super chunky wool

Standard

Knitted Gifts Fast

Fast knits!

This super chunky knitted scarf took less than a day start to finish. Including figuring the style and making the buttons. The pattern was one I thought of that would work best for this project.

You can use any alternatives but these are what I used and would bode best for this pattern. Plus the quality of the yarn speaks volumes on this project. Ideal as a winter time gift.

Dimensions 7.5″ x 28″

What you need
1 x ball of  Sirdar Denim Ultra Wool (super chunky)
8mm Knitting Needles
3 x 15-18mm Odd but similar sized buttons with preferably 4 sewing holes.
Small piece of colour coordinating Wool Felt to cover buttons
Needle and thread

Directions
Using the 8mm knitting needles
Cast on 18 sts

(Rib pattern row)
[Row 1 -K2, P2 until last 2 stitches, K2]
[Row 2 -P2, K2 until last 2 stitches, P2]
knit Row 2 of rib pattern
knit Row 1 of rib pattern

(Body of scarf)
(right side row)Knit row
Purl row
P2, K14, P2
K2, P14, K2

Continue scarf body pattern until you reach 26″ ending on a wrong side

Knit Row 2 of rib pattern
Knit Row 1 of rib pattern
Knit Row 1 of rib pattern
Knit Row 2 of rib pattern

Cast off and tie in any ends not weaved in.

How it's fastened

The buttons were made using a simple technique. With leftover yarn from the scarf. There should be more than enough if you have good tension.

Cut 3 lengths of yarn at around 8″
3 x 2″ diameter felt circles, or big enough to cover the buttons as pictured.

Tie knots in the centre to make a bobble. Split the yarn so you have 4 tails (see picture below) and thread each through the 4 eyes of the button.

Using small stitches, make a running stitch around circles of felt. Do not knot yet.

Pull slightly on the thread so that it creates a slight dome shape. Place in the prepared knotted wool and button. Pull the thread and make sure the thread covers the back of the button centrally. Tie off the thread after sewing over the felt and yarn to secure the back, as these will be pulled at when used.

Using the picture to help you with placement, use the tails of the buttons to tie onto the rib of the scarf. Making sure they line up with the natural holes created by your stitches.

The three stages of covering the buttons

Threading Technique

Finishing the button

Easy Craft Project – Felt Egg Cosy Cactus Fun for Kids

Standard

Quick Cactus Egg Cosy

Egg Cosy

If you would like to try this project here are the directions to make one cosy.

What you’ll need
2.5″ x 9″ Green Felt
Scraps of Coloured Felt for the Flower
Selection of Embroidery Thread in Beige and another coloured thread.
45 Silver Lined Sead Beads or whatever colour you would like
Felting Needle will help with the hand sewing, they are pyramid-shaped.
Templates Below


Directions
Cut out 3 arches that measure 3″ in width and 2.5″ in height. These templates should print out to size. Read the rest of this entry

Knitting for Charity – Squares for Children’s Blankets and Other Little Projects

Standard

Want to Knit-a-square?

Use up Odd Balls of Yarn

I stumbled across this organization Knit-a-square. With our help they provide warm blankets and clothing for sick children in South Africa.

There are lots of patterns to choose from too, such as hats, vests, jumpers and pull overs. If you are very creative you can share your own pattern too.

You don’t need to know how to knit to contribute to this project. If you have any old wool clothing or find any in the charity shops, you can felt them and cut the 8×8″ squares out of the felted fabric. Just by washing and using a dryer you can felt a knitted garment. This mats the fibres so when you cut the fabric it won’t fray or unravel.

It doesn’t matter what type of yarn you have. But take a look at their advice on what to use if you want to contribute to a heart warming cause.

Let me know if you have contributed already. If you have any pictures to share of your donations I would be happy to add them to this blog post!

Happy Knitting.

Sewing For Pleasure Exhibition March 2010

Standard

Crafting Goodies

My Goodies

This huge exhibition has so many talented artists and many interesting crafts to explore.

My favourite stall holder was 21st Century Yarns, with their hand dyed yarns and cloth. I am going to be using these threads for a few different projects. A silk embroidered hand/clutch bag, an embellished cushion.

I also purchased some 100% cotton yarn,  hand dyed in Chile by Araucanía Yarns. It’s a smooth thick yarn, pictured in blue, black and green. Can’t wait to make myself and my son a snuggly scarf with the lush one-off hanks. Each one sold creates more opportunities for the local people of Chile, bringing new skills, jobs and hope fr the future.

Check back here soon to see what I make of these super lush fabrics.