Tag Archives: free pattern

Crochet Unicorn #2 with Wings – Free Ravelry Pattern

Standard

Hermione #2! This time I went for pink with rainbow mane and tail. I think this version looks even better than the last one.

Here’s the link again for this pattern at Ravelry. Here is the link to the pattern for the added wings.

Skylanders Chompy Chompie Free Crochet Pattern

Standard

Crochet your own Chompies!

So my son is obsessed with Skylanders! But you can’t find any patterns for anything related to this game. So I decided to try to crochet him a Chompy, the small critter that features in the game. So, forgive me if this pattern is not 100% accurate as this is my first toy crochet pattern. The single crochets refer to the US version. If you have any problems with the instructions, please leave a comment or contact me and I’ll fix it/advise you. The teeth and fingers are just cut out from felt and sewn in. The eyes are just embroidered with a satin stitched.

Have fun with this little guy, it didn’t take too long to wip up, and uses less than half a ball of green dk yarn (100g), so leftovers would probably work.

He stands at 8″ high, including his eyes.

Each new line depicts a new row or round.

sc = single crochet
sc2tog = Single crochet 2 stitches together
ch = chain
sc2 in nxt = Increase
dcr = decrease
PATTERN

Skylanders Chompy

3.5 hook Hayfield Bonus DK yarn Shade 0886 100g Ball
Yarn colours needed Green, Red and Black.
Small felt pieces in green and white.

Hands Make 2
Ch16, sc into 1st chain to make a circle (now work in rounds)
sc round x2 (16 sts)
*sc2tog, sc2, *repeat to end (12sts)
sc round
sc2tog, sc2, repeat to end (9sts)
sc round x2
tie off
Flatten and sew in felt fingers using the picture as a guide.
Stuff and set aside

——–
Feet Make 2

Magic circle 6 sts
2 sc in next each st. (12 sts)
*1sc, 2 sc in next st, *repeat to end (18sts)
sc2tog, sc 1, sc2tog, sc 1, sc2tog, sc 10.(15 sts)
sc 15. rows x4
*sc2tog, sc 3. *repeat x2. (12sts)
sc2tog, sc2, repeat x3 (9sts)
2sc in every st to end of row (18 sts)
*sc 1, 2sc in next st, *repeat to end (27 sts)
sc row
tie off 1st but not second.
Stuff and set aside

Read the rest of this entry

Hermione the unicorn Crochet Pattern with wings – Free – Ravelry

Standard

Hermione the Unicorn

Check out this free pattern on Ravelry. It’s SO freaking cute, it’s not too difficult, but I wouldn’t recommend it for beginners. The original pattern does not come with the wings pictured as I added those myself. If you’d like to add them too I have included the instructions in this post below. Enjoy!..

Wings – 3.5 Hook (Make 2)
Ch16
Sc in 1st chain, skip 1 ch, sc in next 15 to end, ch2 turn.
Skip 1 st, sc in next and following 10sts
Slip st in next st, ch2, turn.
Skip 1 st, sc in next and following 3 sts.

chain 1, work 3 dc popcorn st in next stRepeat x5 .. Chain3, turn.

Make 3 Trebles in spaces between the popcorn sts already made below, slip st inside next popcorn st belowRepeat x3

Tie off + Sew on ..OR.. Slip st straight onto side of the body along top edge of the wing.

On the second wing you will want to push the popcorn stitches out the opposite way to the first wing. So you get a pair, and not two the same.

This slideshow requires JavaScript.

Baby Born Chou Chou 17″ Doll sized mitten Free Knitting Pattern

Standard

Free Knitting Pattern for a Doll 17″ Tall

Doll Mittens

3mm Needles – 4 ply yarn

Make 2 c/0 34sts

k2, p2 to end
p2, k2 to end
k2, p2 to end
p2, k2 to end
(Knit Row, Purl Row) x 5
k4, k2tg, k8, k2tg, k8, k2tg, k5, k2tg, k1
Purl Row
k4, k2tg, k4, k2tg, k6, k2tg, k4, k2tg, k4
Purl Row
k2, k2tg to end
Purl Row
k2tg to end
Purl Row
Cut yarn leaving 6 inches of thread, use this to thread through the loops remaining on the needle using a darning needle. Pull Tight and knot. Fold to join edges right sides together and sew up the seam. Additionally you, so they don’t get easily lost. Braid, or using a crochet hook create a chain long enough for your doll and tie to each wrist of the mittens. Thread through the clothing of the doll, just like you would for a child.

Hope you have fun knitting these easy cute mittens! They make a lovely gift, I will be posting more patterns for 17″ dolls soon.

Suitable for Chou Chou, Baby Annabell, Walk and Learn Doll and dolls of similar size.

Doll Mittens

Knitted Cowl / Buttoned Scarf – How to – using super chunky wool

Standard

Knitted Gifts Fast

Fast knits!

This super chunky knitted scarf took less than a day start to finish. Including figuring the style and making the buttons. The pattern was one I thought of that would work best for this project.

You can use any alternatives but these are what I used and would bode best for this pattern. Plus the quality of the yarn speaks volumes on this project. Ideal as a winter time gift.

Dimensions 7.5″ x 28″

What you need
1 x ball of  Sirdar Denim Ultra Wool (super chunky)
8mm Knitting Needles
3 x 15-18mm Odd but similar sized buttons with preferably 4 sewing holes.
Small piece of colour coordinating Wool Felt to cover buttons
Needle and thread

Directions
Using the 8mm knitting needles
Cast on 18 sts

(Rib pattern row)
[Row 1 -K2, P2 until last 2 stitches, K2]
[Row 2 -P2, K2 until last 2 stitches, P2]
knit Row 2 of rib pattern
knit Row 1 of rib pattern

(Body of scarf)
(right side row)Knit row
Purl row
P2, K14, P2
K2, P14, K2

Continue scarf body pattern until you reach 26″ ending on a wrong side

Knit Row 2 of rib pattern
Knit Row 1 of rib pattern
Knit Row 1 of rib pattern
Knit Row 2 of rib pattern

Cast off and tie in any ends not weaved in.

How it's fastened

The buttons were made using a simple technique. With leftover yarn from the scarf. There should be more than enough if you have good tension.

Cut 3 lengths of yarn at around 8″
3 x 2″ diameter felt circles, or big enough to cover the buttons as pictured.

Tie knots in the centre to make a bobble. Split the yarn so you have 4 tails (see picture below) and thread each through the 4 eyes of the button.

Using small stitches, make a running stitch around circles of felt. Do not knot yet.

Pull slightly on the thread so that it creates a slight dome shape. Place in the prepared knotted wool and button. Pull the thread and make sure the thread covers the back of the button centrally. Tie off the thread after sewing over the felt and yarn to secure the back, as these will be pulled at when used.

Using the picture to help you with placement, use the tails of the buttons to tie onto the rib of the scarf. Making sure they line up with the natural holes created by your stitches.

The three stages of covering the buttons

Threading Technique

Finishing the button

Crochet – Coaster / Cover for alfresco dinning – Quick project

Standard

Stash Buster Project

Beaded Coaster or Cover

So, I was given a free book of crochet patterns. It was from the May 2010 ‘Let’s Knit’ Issue. I hadn’t picked up a crochet hook for a long time. Since I struggled to complete a blanket for my unborn son at the time. But as this seemed quite quick, I referred to my ‘how to’ book of crocheting and finished it in a flash! These would make excellent stocking fillers. You could easily convert them to look Christmas-ee. Sorry I mentioned the ‘C’ word already. But hey, you gotta be prepared. So many crafting options, so little time.

The beads I used were glass, but I should have used more or chosen a heavier bead so that they would weigh it down to bring out the shape better. You could, of course, use any colour combination. I just used what I had, and I just happened to only have white in 4 ply. The suggest you can use ribbon, but you could use any yarn you like. Just choose an appropriate hook and if your yarn or yarn substitute  is much thicker then make reduce the amount of rounds you make.

If you missed this issue and would like to get this pattern. It can be found in the book ‘Two Balls or Less’ by Jenny Hill. It’s RRP is about £12.99 and has over 30 simple crochet and knitting projects.

As an added note, the hook used is 3.5mm.

Easy Craft Project – Felt Egg Cosy Cactus Fun for Kids

Standard

Quick Cactus Egg Cosy

Egg Cosy

If you would like to try this project here are the directions to make one cosy.

What you’ll need
2.5″ x 9″ Green Felt
Scraps of Coloured Felt for the Flower
Selection of Embroidery Thread in Beige and another coloured thread.
45 Silver Lined Sead Beads or whatever colour you would like
Felting Needle will help with the hand sewing, they are pyramid-shaped.
Templates Below


Directions
Cut out 3 arches that measure 3″ in width and 2.5″ in height. These templates should print out to size. Read the rest of this entry

FujiFilm finepix – Knitted Camera Case Free Pattern

Standard

Knit your own case

FUJIFILM FINEPIX Case

A cute little case for your Fuji camera. This only takes a couple hours at the most, including sewing on some decoration and adding the snap fasteners.

The stitches you need to know are casting on, knit, purl and casting off. If you don’t know how to do any of these stitches I advise you to search for a video tutorial. YouTube is usually a good source for this.

This is an ideal gift because you can use left over yarns and spare sequins and beads from other projects to decorate.

Here is how I did it.

Read the rest of this entry

Angelbear Knitting Pattern – free for non-profit

Standard

Free Knitting Pattern for www.angelbear.org.uk

Front

The yarn coding refers to the colours I have used so that you can refer to the picture as a helpful guide. If you notice any problems with this pattern please contact me so I can rectify it.
Yarn A= White
Yarn B= Lilac
Yarn C= Green
Yarn D= Pink

HEAD
Yarn A
C/o 18 sts
Row 1= Knit
Row 2= Purl
Row 3= Knit
Row 4= Purl
Row 5= Knit
Row 6= Purl
Row 7= Knit
Row 8= P3, K3, P6, K3, P3
Row 9= K2, P5, K4, P5, K2
Row10= repeat row 9
Row11= repeat row 9
Row12= repeat row 8
Row13= knit and every odd row until and including row 19
Row14= Purl and every even row until and including row 20