I had lots of the fabric leftover from the dress project. So I figured a skirt wouldn’t go a miss! Nor would a matching hair bow! Check out the pictures below. Super simple elasticated waist. For a 14 Month old I had a 19″ waist and 7″ length for above the knee. I’ll be posting another project that I have done putting more of this fabric to use. It was originally bought to match a custom made cloth nappy my niece had. One metre of fabric has gone a long long way, and there is still more of it left!
So my son is obsessed with Skylanders! But you can’t find any patterns for anything related to this game. So I decided to try to crochet him a Chompy, the small critter that features in the game. So, forgive me if this pattern is not 100% accurate as this is my first toy crochet pattern. The single crochets refer to the US version. If you have any problems with the instructions, please leave a comment or contact me and I’ll fix it/advise you. The teeth and fingers are just cut out from felt and sewn in. The eyes are just embroidered with a satin stitched.
Have fun with this little guy, it didn’t take too long to wip up, and uses less than half a ball of green dk yarn (100g), so leftovers would probably work.
He stands at 8″ high, including his eyes.
Each new line depicts a new row or round.
sc = single crochet
sc2tog = Single crochet 2 stitches together
ch = chain
sc2 in nxt = Increase
dcr = decrease
3.5 hook Hayfield Bonus DK yarn Shade 0886 100g Ball
Yarn colours needed Green, Red and Black.
Small felt pieces in green and white.
Hands Make 2
Ch16, sc into 1st chain to make a circle (now work in rounds)
sc round x2 (16 sts)
*sc2tog, sc2, *repeat to end (12sts)
sc2tog, sc2, repeat to end (9sts)
sc round x2
Flatten and sew in felt fingers using the picture as a guide.
Stuff and set aside
Feet Make 2
Magic circle 6 sts
2 sc in next each st. (12 sts)
*1sc, 2 sc in next st, *repeat to end (18sts)
sc2tog, sc 1, sc2tog, sc 1, sc2tog, sc 10.(15 sts)
sc 15. rows x4
*sc2tog, sc 3. *repeat x2. (12sts)
sc2tog, sc2, repeat x3 (9sts)
2sc in every st to end of row (18 sts)
*sc 1, 2sc in next st, *repeat to end (27 sts)
tie off 1st but not second.
Stuff and set aside
Check out this free pattern on Ravelry. It’s SO freaking cute, it’s not too difficult, but I wouldn’t recommend it for beginners. The original pattern does not come with the wings pictured as I added those myself. If you’d like to add them too I have included the instructions in this post below. Enjoy!..
Wings – 3.5 Hook (Make 2)
Sc in 1st chain, skip 1 ch, sc in next 15 to end, ch2 turn.
Skip 1 st, sc in next and following 10sts
Slip st in next st, ch2, turn.
Skip 1 st, sc in next and following 3 sts.
chain 1, work 3 dc popcorn st in next stRepeat x5 .. Chain3, turn.
Make 3 Trebles in spaces between the popcorn sts already made below, slip st inside next popcorn st belowRepeat x3
Tie off + Sew on ..OR.. Slip st straight onto side of the body along top edge of the wing.
On the second wing you will want to push the popcorn stitches out the opposite way to the first wing. So you get a pair, and not two the same.
Sooo pleased with this!
A little project just for me. I just couldn’t resist making myself this cute head band. The swan itself was drawn by myself, transferred onto felt and embellished with a lace ‘half’ yo-yo’, then decorated with seed beads. Other decorations I added were some little vintage black buttons, bugle beads and faceted glass beads. For the eye I used a vintage green Mother of Pearl button with a fish eye design. I embroidered a simple trellis on the chest too.
I’m so pleased with this, I’m going to make a few more animal designs. Next I want to try an octopus, I think this will look great too in those white and dirty vintage creams and off pinks. *squeals* can’t wait!
Oh, and to top it off.. I’m going to the NEC in Birmingham to the Sewing for Pleasure Craft Event at the end of March! Will be buying loads of fabric goodies and crafting essentials.
Let me know what you think of my head band below! Happy Crafting. =]
Gift for an avid reader!
These 2 bookmarks were made for my Grandparents. My Grandad is a WWII veteran and his father was in WWI. So a gift to show we still remember what they gave was lovingly received. My Nan, she just loves her flowers. At a risk of being boring or predictable, I designed a Peony flower in a Jacobean style. I guess it could also pass for a rose too. However, I thin it worked out looking nice. Let me know what you think below in the comments!
I want to share some tips with you about working with felt. Although I’m a relative newcomer to felt. I have taken some time working with it. Especially embroidering. It’s not too hard to embroider onto, altho if you tug at the work the felt will, over time distort. The worst is, you probably won’t notice until it’s too late and you’ve done all the hard work. Soooo.. my tip is to work with a piece larger than you intend to use for the end result. That way, the edges you’ve been gripping during any sewing will be trimmed off and you’ll have a lovely neat finish.
If your felt is thin or the acrylic type. You might want to strengthen the overall design by sandwiching a light card in between another piece of the felt. Sew close to the edge of the card. so that it’s trapped inside. A thin layer of PVA glue between the layers is a good idea too.
To finish I topped them with a button, and on my Nan’s, a bit of ribbon from my stash. These are around 6.5″ x 2.5″ in size. The poppy design ended up being a smidge taller due to the script.
The stitches used are, running stitch, satin stitch, back stitch, heavy chain, trellis, split stitch, french knot and fly stitch.
Any questions about these bookmarks are welcome, please comment below!
Free Knitting Pattern for a Doll 17″ Tall
3mm Needles – 4 ply yarn
Make 2 c/0 34sts
k2, p2 to end
p2, k2 to end
k2, p2 to end
p2, k2 to end
(Knit Row, Purl Row) x 5
k4, k2tg, k8, k2tg, k8, k2tg, k5, k2tg, k1
k4, k2tg, k4, k2tg, k6, k2tg, k4, k2tg, k4
k2, k2tg to end
k2tg to end
Cut yarn leaving 6 inches of thread, use this to thread through the loops remaining on the needle using a darning needle. Pull Tight and knot. Fold to join edges right sides together and sew up the seam. Additionally you, so they don’t get easily lost. Braid, or using a crochet hook create a chain long enough for your doll and tie to each wrist of the mittens. Thread through the clothing of the doll, just like you would for a child.
Hope you have fun knitting these easy cute mittens! They make a lovely gift, I will be posting more patterns for 17″ dolls soon.
Suitable for Chou Chou, Baby Annabell, Walk and Learn Doll and dolls of similar size.
I’ve been quite busy over the winter months, especially before Christmas. So I have a backlog of stuff I need to post. Most of the things you need for this are tools most people and almost definitely frequent crafters’ will have already.
The wall hanging is made from 2 x A4 chipboard (cardboard), cotton fabric, acrylic yarn and felt. Held together with fabric glue I used PVA glue as it does a good job, also I used some cotton embroidery thread. You’ll also need scissors, a hole punch suitable for heavy card and hammer, pencil, embroidery needle or a large sewing needle, iron, and last but definitely not least a decent craft knife/Stanley blade.
Made for my niece as a Christmas present. I wanted to include her name, Summah. The name is cut out using acrylic felt because it was what I had in my stash. But you could use any you have.
Draw out yourself a cloud design. To make it as even as mine you can cheat like I did and draw around something =] .
I used a plate and something else small I can’t remember, maybe a cookie cutter to draw the rainbow. You could just use a rectangle though instead of a rainbow shape. Cut both out with a blade.
At this point make sure you mark evenly according to the weight balance of your shapes the wholes and don’t punch them too close to the edge as it will not work very well. Important – Keep the bits you punch out. You’ll need them afterwards! Read the rest of this entry
Knitted Gifts Fast
This super chunky knitted scarf took less than a day start to finish. Including figuring the style and making the buttons. The pattern was one I thought of that would work best for this project.
You can use any alternatives but these are what I used and would bode best for this pattern. Plus the quality of the yarn speaks volumes on this project. Ideal as a winter time gift.
Dimensions 7.5″ x 28″
What you need
1 x ball of Sirdar Denim Ultra Wool (super chunky)
8mm Knitting Needles
3 x 15-18mm Odd but similar sized buttons with preferably 4 sewing holes.
Small piece of colour coordinating Wool Felt to cover buttons
Needle and thread
Using the 8mm knitting needles
Cast on 18 sts
(Rib pattern row)
[Row 1 -K2, P2 until last 2 stitches, K2]
[Row 2 -P2, K2 until last 2 stitches, P2]
knit Row 2 of rib pattern
knit Row 1 of rib pattern
(Body of scarf)
(right side row)Knit row
P2, K14, P2
K2, P14, K2
Continue scarf body pattern until you reach 26″ ending on a wrong side
Knit Row 2 of rib pattern
Knit Row 1 of rib pattern
Knit Row 1 of rib pattern
Knit Row 2 of rib pattern
Cast off and tie in any ends not weaved in.
The buttons were made using a simple technique. With leftover yarn from the scarf. There should be more than enough if you have good tension.
Cut 3 lengths of yarn at around 8″
3 x 2″ diameter felt circles, or big enough to cover the buttons as pictured.
Tie knots in the centre to make a bobble. Split the yarn so you have 4 tails (see picture below) and thread each through the 4 eyes of the button.
Using small stitches, make a running stitch around circles of felt. Do not knot yet.
Pull slightly on the thread so that it creates a slight dome shape. Place in the prepared knotted wool and button. Pull the thread and make sure the thread covers the back of the button centrally. Tie off the thread after sewing over the felt and yarn to secure the back, as these will be pulled at when used.
Using the picture to help you with placement, use the tails of the buttons to tie onto the rib of the scarf. Making sure they line up with the natural holes created by your stitches.
Knitted Gifts for Kids
I made this dinosaur from a magazine pattern, I forget which one, in September. It’s taken me a while to post on here as I’ve had a few distractions keeping me away. The magazine also features another dinosaur and can be knitted in any colours you like, even girly pinks and purples. My dear son loves this dino, and takes it to bed with him!
You can buy poly stuffing quite cheaply. This was an easy pattern, however it did seem like an eternity sewing up all those ends for the back plates. But was fun and glad I gave it a go.
Remember to always be extra careful sewing up toys for toddlers as they can be quite rough and tough on your knitted gift. Use a crochet hook to pull all the loose ends into the toy and firmly into the stuffing.
If you gave this pattern a go, let me know how you got on, I’d love to see the different colours you used. I used Hayfield fantasy in the green tones with orange and yellow toy yarn for the plates and spots.
Personalized Fathers Day Gift
I said I’d update you all on my Father’s Day project for my hubby from my 2yr old son. I started the embroidery yesterday afternoon. I was surprised how quickly it grew. It’s pictured here with the mount i intend to use. I used two shades of a silvery grey. The canvas I used is slightly off-white. But that’s ok, it’s not as contrast as it looks in the picture.
Below is a picture guide to how I went about this. Any suggestions for the bottom right hand corner would be good. Or even if this should be filled in. I did want to reference the year and a father son quote that relates to the hands.
Please let me know what you think below.
Mickey is number one!
For my son’s first birthday (last year) I baked him a Mickey Mouse theme cake. I used 9″ and 6″ cake tins to do this 2 tier cake.
I baked the cake base using this recipe or you could choose your own. You only need 1 and half times the recipe. One for the bottom and half is for the top. I halved my tiers and layered butter cream in the centre. You wouldn’t need to do this. But you will need to make a batch of butter cream to ‘stick’ the fondant to the cake.
To get the top cake, not to sink into the other cake while it’s on top, cause that just wouldn’t be pretty! Use 3 or 4 cut down straws or wooden skewers to the height of the fondant layer. Rest your cake on its own 6″ base or if using a different size tins it should measure the same as your cake so you can’t see it. It will be easier to remove it after for cutting that way. The bottom layer should probably have one at least an inch larger base than the bottom layer cake.
Ok, so you’ve baked your cake and let it cool, added butter cream to the outside and you’ve rolled out the fondant and placed it neatly over the top. Once it’s all smooth and square with the cake, you’ll want to start decorating. I only used supermarket fondant that is fairly cheap, but tasty. With the white you can also dye it any colour you like using gel colours. For mine I’m sure I used Ruby Red, Violet, and Christmas green and licorice black. Of course with any dying process you will have to add a bit at a time to get the colour you want.
The best technique I’ve found for blending the colour the best is by making a well in the white fondant ball and using a cocktail stick to control how much I put in. Place in a small amount and close the well up so the dye is inside. This will help stop the majority of the dye getting straight all over your hands. Cause it doesn’t come off your hands easily. Now roll, just using your hands, the ball into a sausage shape. You want it to be long enough to turn back on itself. Now just rinse and repeat until it is all blended. This method will help stop it sticking all on your hands too. If you add too much dye, try adding icing sugar powder to soak up the extra moisture. Now let the coloured icing sit aside and cool down. You could now dye another batch and so on. Once you have all the colours you want, return to the first colour as it should have cooled enough. Don’t leave it a long time or it will start to dry out. If you plan to use it later that day you can wrap it in cling film to stop it from drying up.
I used letter fondant cutter for his name. The Mickey heads were about 1.5″ in diameter. If you don’t have a tiny cutter for his ears (assuming you don’t just have a mickey mouse cutter) you can roll a small piece into a ball and press into shape straight onto the cake. You may want to test your sizing before going straight to the cake and make all your ear balls before applying them so they are uniform in size.
A way to get your fondant shapes to stick is to use an edible glue or make your own by using good spoon full of icing sugar and add drops of water until a glue consistency. Remember though, it takes more sugar to water to fix it if you put too much water in. So do it gradually.
You can finish of (or hide any messy edges) by using ribbon around the bottom of each layer. Hold in place with a tiny piece of clear tape or like I did using butter cream as a glue.
You should end up with an awesome, but more importantly, handmade cake! Enjoy giving and eating together! Hope you found this guide useful. Let me know if you try this! I love to share others photos too. Post a comment to contact me.
First of my seeds planted
I’m super-excited to say I planted my first few seeds to start my raised bed with. Hopefully my hubby will build my raised bed this weekend or before. I just can’t wait to get started. I still need to buy quite a few supplies to help along the way.
My lovely Aunt gave me a head start by supplying me with seeds and pots, and even some books to read! Isn’t she lovely?! I think I somehow agreed to crochet a scarf for her tho in return. lol. I don’t mind tho =] She gave me Sweet peppers, chilli peppers, tomatoes in different varieties and runner beans to plant now. The romaine lettuce, iceberg lettuce and mixed salad leave will have to wait as they need to be planted where they are to be cropped. Thanks Aunty!
Anyways, back to planting. As you can tell by the picture, I have used recycled grape and tomato containers to create a makeshift propagator. I put several seeds in each pot. I shall pull out any that are really weedy looking. I just hope that it’s right! I only placed one seed of the bigger runner beans. I used an egg box for these, as I want to try planting straight into the ground in the box. Anyone else tried this?
Now placed in a really sunny spot on my kitchen shelf. They should do really well before I re-home them in my garden. I shall be using mostly reclaimed building materials to make my raised bed. My only fear is that it’s too shaded in my back garden and I’ll get zip veggies! I get early morning and late evening sun. Any advice would be great!?
Stash Buster Project
So, I was given a free book of crochet patterns. It was from the May 2010 ‘Let’s Knit’ Issue. I hadn’t picked up a crochet hook for a long time. Since I struggled to complete a blanket for my unborn son at the time. But as this seemed quite quick, I referred to my ‘how to’ book of crocheting and finished it in a flash! These would make excellent stocking fillers. You could easily convert them to look Christmas-ee. Sorry I mentioned the ‘C’ word already. But hey, you gotta be prepared. So many crafting options, so little time.
The beads I used were glass, but I should have used more or chosen a heavier bead so that they would weigh it down to bring out the shape better. You could, of course, use any colour combination. I just used what I had, and I just happened to only have white in 4 ply. The suggest you can use ribbon, but you could use any yarn you like. Just choose an appropriate hook and if your yarn or yarn substitute is much thicker then make reduce the amount of rounds you make.
If you missed this issue and would like to get this pattern. It can be found in the book ‘Two Balls or Less’ by Jenny Hill. It’s RRP is about £12.99 and has over 30 simple crochet and knitting projects.
As an added note, the hook used is 3.5mm.
Fusing Plastic, is not so, fantastic!
Armed with my plastic bag supplies, which consist of Asda, Superdrug and Card Factory. Chosen mainly for their colours. Green and Pink =D . I followed the guides of the likes on youtube.com but it didn’t really go all that well. I think I may have had my iron on too high. Although, some tutorials were saying you need 8 ply, others were saying that’s not necessary, and that you can have the iron on full, others on a wool setting. Other than the slight difference in opinions, I thought that the general ‘rules’ of fusing the plastic were fairly easy.
I did start with a cool setting, such as the wool temp on my iron. I used the recommended baking paper and made sure the inked side of the plastic was always topped by another plastic to stop bleeding.
A few passes with the iron on Wool for about 15-20 seconds, but it seemed to do nothing at all. So I turned up the dial and it seemed as though the plastic just didn’t want to fuse together.
Until… it all went horribly wrong and started to shrink at a rapid rate. You can see my results below. Any tips would be great. I really would like another crack at this. As I’d like to make myself a knitting bag using the ‘plastic fabric’. But at the moment. I’m passing this one by. Like I said, any tips on where I may have gone wrong. Also, there doesn’t seem to be much guide on whether some plastics don’t like other plastics and just WON’T fuse together, rather melt upon each other leaving air pockets galore, like in my case. I was disappointed with the results overall, but I did like the composition. You live and learn!
I also wanted to experiment with yarn fibres fused inside. If anyone’s had success with this (or not), please let me know.
Knitted Hair Bow
Hope you like my latest crafty project. Including the time to figure out the pattern and write it down, this took about 10 minutes. It can be attached to any kind of hair accessory base. Hair clip, band, barrettes, slide, …you get the idea.
The yarn I used was a random ball from my stash. I’m not entirely sure of the yarn type but it is very similar to kid mohair. It felts very easily, but this will only help stabilize the design.
The pattern I used is below. Let me know if you use it. I’d love to see your take on it. Btw, I use standard abbreviations in my patterns. So you can refer to any knitting magazine or book if you’re not familiar with the terms.
Kfb = Knit into the front and back of stitch. This increases your row.
What you’ll need
10mm Knitting Needles
Mohair or similar yarn
Hair accessory base
C/o 2sts (make sure you leave at least an 8in tail, this is used to attach your button later, and used to attatch to your hair accesories)
1- kfb, kfb [4sts]
2- kfb, k2, kfb [6sts]
3- k2tg, k2, k2tg [4sts]
4- k2tg, k2tg [2sts]
5- k2tg [1st]
Keep last st on needle
Repeat Rows 1-5, cut yarn leaving 8in to fasten off, threading back through to the centre of the bow with both tails.
Position button in the middle of your bow and sew on using the tails of yarn. Pull tight and secure at back.
To attach to your clip or slide, use a multi-purpose glue that sticks fabric and metal, HT2 would be a good choice.
Quick Cactus Egg Cosy
If you would like to try this project here are the directions to make one cosy.
What you’ll need
2.5″ x 9″ Green Felt
Scraps of Coloured Felt for the Flower
Selection of Embroidery Thread in Beige and another coloured thread.
45 Silver Lined Sead Beads or whatever colour you would like
Felting Needle will help with the hand sewing, they are pyramid-shaped.
Cut out 3 arches that measure 3″ in width and 2.5″ in height. These templates should print out to size. Read the rest of this entry
On its way!
I finally got around to finishing this bear. I’m super happy with it, and glad it has been posted out today. My son adored it and tried to cuddle it while I was still knitting! That just made me think of how I just had to get it finished in time for this weekends post. So it can be safely delivered into a child’s arms.
This is the first ‘Mother Bear Project’ Bear I’ve completed, but it’s not the last. I will knit a ‘boy’ bear next, I think. Any suggestions on the outfit would be fab!
Super idea for a recycling project. Why not raid your Nan’s kitchen cupboard for supplies for this cake stand?
Posted using ShareThis
Want to Knit-a-square?
I stumbled across this organization Knit-a-square. With our help they provide warm blankets and clothing for sick children in South Africa.
There are lots of patterns to choose from too, such as hats, vests, jumpers and pull overs. If you are very creative you can share your own pattern too.
You don’t need to know how to knit to contribute to this project. If you have any old wool clothing or find any in the charity shops, you can felt them and cut the 8×8″ squares out of the felted fabric. Just by washing and using a dryer you can felt a knitted garment. This mats the fibres so when you cut the fabric it won’t fray or unravel.
It doesn’t matter what type of yarn you have. But take a look at their advice on what to use if you want to contribute to a heart warming cause.
Let me know if you have contributed already. If you have any pictures to share of your donations I would be happy to add them to this blog post!
Make a pincushion
I was asked to make a pincushion for my Aunt. Her favourite colours are black and white so that gave me my starting block. I think choosing fabric, is sometimes the hardest bit. I knew how I wanted it to look, so I winged it from there.
This is a rough guide to how it was made. It really is a simple design tho, let me know if you try this.
What you’ll need
½ metre (roughly) Ribbon
1 or 2 Buttons
2-3 Different Patterned Fabric (I used quilting cotton)
3.5″ square of Felt (any colour, but try not to be too contrasting if you can see it through the fabric)
Coordinating Sewing thread
Quilting Square (optional, but easier)
Read the rest of this entry