Fusing Plastic, is not so, fantastic!
Armed with my plastic bag supplies, which consist of Asda, Superdrug and Card Factory. Chosen mainly for their colours. Green and Pink =D . I followed the guides of the likes on youtube.com but it didn’t really go all that well. I think I may have had my iron on too high. Although, some tutorials were saying you need 8 ply, others were saying that’s not necessary, and that you can have the iron on full, others on a wool setting. Other than the slight difference in opinions, I thought that the general ‘rules’ of fusing the plastic were fairly easy.
I did start with a cool setting, such as the wool temp on my iron. I used the recommended baking paper and made sure the inked side of the plastic was always topped by another plastic to stop bleeding.
A few passes with the iron on Wool for about 15-20 seconds, but it seemed to do nothing at all. So I turned up the dial and it seemed as though the plastic just didn’t want to fuse together.
Until… it all went horribly wrong and started to shrink at a rapid rate. You can see my results below. Any tips would be great. I really would like another crack at this. As I’d like to make myself a knitting bag using the ‘plastic fabric’. But at the moment. I’m passing this one by. Like I said, any tips on where I may have gone wrong. Also, there doesn’t seem to be much guide on whether some plastics don’t like other plastics and just WON’T fuse together, rather melt upon each other leaving air pockets galore, like in my case. I was disappointed with the results overall, but I did like the composition. You live and learn!
I also wanted to experiment with yarn fibres fused inside. If anyone’s had success with this (or not), please let me know.