I had lots of the fabric leftover from the dress project. So I figured a skirt wouldn’t go a miss! Nor would a matching hair bow! Check out the pictures below. Super simple elasticated waist. For a 14 Month old I had a 19″ waist and 7″ length for above the knee. I’ll be posting another project that I have done putting more of this fabric to use. It was originally bought to match a custom made cloth nappy my niece had. One metre of fabric has gone a long long way, and there is still more of it left!
Check out this free pattern on Ravelry. It’s SO freaking cute, it’s not too difficult, but I wouldn’t recommend it for beginners. The original pattern does not come with the wings pictured as I added those myself. If you’d like to add them too I have included the instructions in this post below. Enjoy!..
Wings – 3.5 Hook (Make 2)
Sc in 1st chain, skip 1 ch, sc in next 15 to end, ch2 turn.
Skip 1 st, sc in next and following 10sts
Slip st in next st, ch2, turn.
Skip 1 st, sc in next and following 3 sts.
chain 1, work 3 dc popcorn st in next stRepeat x5 .. Chain3, turn.
Make 3 Trebles in spaces between the popcorn sts already made below, slip st inside next popcorn st belowRepeat x3
Tie off + Sew on ..OR.. Slip st straight onto side of the body along top edge of the wing.
On the second wing you will want to push the popcorn stitches out the opposite way to the first wing. So you get a pair, and not two the same.
Sooo pleased with this!
A little project just for me. I just couldn’t resist making myself this cute head band. The swan itself was drawn by myself, transferred onto felt and embellished with a lace ‘half’ yo-yo’, then decorated with seed beads. Other decorations I added were some little vintage black buttons, bugle beads and faceted glass beads. For the eye I used a vintage green Mother of Pearl button with a fish eye design. I embroidered a simple trellis on the chest too.
I’m so pleased with this, I’m going to make a few more animal designs. Next I want to try an octopus, I think this will look great too in those white and dirty vintage creams and off pinks. *squeals* can’t wait!
Oh, and to top it off.. I’m going to the NEC in Birmingham to the Sewing for Pleasure Craft Event at the end of March! Will be buying loads of fabric goodies and crafting essentials.
Let me know what you think of my head band below! Happy Crafting. =]
Free Knitting Pattern for a Doll 17″ Tall
3mm Needles – 4 ply yarn
Make 2 c/0 34sts
k2, p2 to end
p2, k2 to end
k2, p2 to end
p2, k2 to end
(Knit Row, Purl Row) x 5
k4, k2tg, k8, k2tg, k8, k2tg, k5, k2tg, k1
k4, k2tg, k4, k2tg, k6, k2tg, k4, k2tg, k4
k2, k2tg to end
k2tg to end
Cut yarn leaving 6 inches of thread, use this to thread through the loops remaining on the needle using a darning needle. Pull Tight and knot. Fold to join edges right sides together and sew up the seam. Additionally you, so they don’t get easily lost. Braid, or using a crochet hook create a chain long enough for your doll and tie to each wrist of the mittens. Thread through the clothing of the doll, just like you would for a child.
Hope you have fun knitting these easy cute mittens! They make a lovely gift, I will be posting more patterns for 17″ dolls soon.
Suitable for Chou Chou, Baby Annabell, Walk and Learn Doll and dolls of similar size.
I’ve been quite busy over the winter months, especially before Christmas. So I have a backlog of stuff I need to post. Most of the things you need for this are tools most people and almost definitely frequent crafters’ will have already.
The wall hanging is made from 2 x A4 chipboard (cardboard), cotton fabric, acrylic yarn and felt. Held together with fabric glue I used PVA glue as it does a good job, also I used some cotton embroidery thread. You’ll also need scissors, a hole punch suitable for heavy card and hammer, pencil, embroidery needle or a large sewing needle, iron, and last but definitely not least a decent craft knife/Stanley blade.
Made for my niece as a Christmas present. I wanted to include her name, Summah. The name is cut out using acrylic felt because it was what I had in my stash. But you could use any you have.
Draw out yourself a cloud design. To make it as even as mine you can cheat like I did and draw around something =] .
I used a plate and something else small I can’t remember, maybe a cookie cutter to draw the rainbow. You could just use a rectangle though instead of a rainbow shape. Cut both out with a blade.
At this point make sure you mark evenly according to the weight balance of your shapes the wholes and don’t punch them too close to the edge as it will not work very well. Important – Keep the bits you punch out. You’ll need them afterwards! Read the rest of this entry
Not as easy as they look!
I made it my mission to make some Minnie mouse cake pops. However, I didn’t anticipate this to be as frustrating as it was. With the overall waiting for the cake to cook, fair enough, but there was soooo much waiting for things to cool, set or cook. I was getting rather tired of doing them.
I followed instructions from another website that sounded like they had it in the bag. I started out with 20 cake pops. After lots of hassle with them staying on the stick I went through several techniques in coating these little babies in chocolate. I knew I couldn’t just dunk and pull it out all fresh-as-you-like. Cause the weight of the chocolate would rip the cake ball apart and stay put in your nice bowl of melted chocolate.
In the end the best technique I found was to use a heat proof silicone pastry brush and slowly coat the balls supporting the ball underneath with your hand so it didn’t shift down the stick. Place on its head on grease proof paper and don’t move it until it’s set. You won’t need to refrigerate for it to set. Plus it attracts condensation if you do.
Once I had a thin layer on and it had set and could be peeled from the paper. I was able to coat allot easier due to the chocolate acting like glue and it (mostly) stayed put. Your next layer of chocolate should include placing the ears on. I used chocolate buttons. Don’t bother trimming the side off like some websites tell you. This only inhibits the attaching part, which frankly is quite important! =D Push the ears in after the second coat of chocolate, as this will soften the previous layer just enough to help with that. Otherwise they just break up! These are then to be stood up on their sticks to set, a block of Styrofoam is useful here. A useful tip I did pick up is to make use of a cocktail stick. Just to pick define areas like the ears and to move the chocolate and to remove any excess. I coated mine until I was happy with them. Or at least, not so disappointed!
You only need to make them around 1 inch diameter at first, as the chocolate layers bulk them out. I was worried I wouldn’t get them inside the cellophane bags I had that were 3.5″x5″ I bought from Ebay. I chose 4.5″ lolly sticks or the plastic variety, if they don’t come with, you will need some plastic coated wires too to seal them. On my travels around my local town of Cannock, I picked up some lovely ribbon the I thought was just right, at 20p a meter I wasn’t complaining!
I just cut the ribbon a few inches long and tied once tightly. You could, with thinner ribbon tie a bow. But at this point in the baking and making process, I was ready to give up altogether. In the end, I managed to salvage 11 decent looking Minnie silhouettes. They didn’t taste bad at all either. My 2.5yr old son was happy to eat any disaster pops. Although to be fair they were very rich, so don’t worry if you don’t make a lot. I probably wouldn’t eat more than one at a time.
Overall, I’m happy I gave it a go, but I won’t be in a hurry to try this again. Maybe plain round ones with decoration on top to disguise the dodgy coating of chocolate. Let me know if you have tried this and how it worked out.
Knitted Gifts for Kids
I made this dinosaur from a magazine pattern, I forget which one, in September. It’s taken me a while to post on here as I’ve had a few distractions keeping me away. The magazine also features another dinosaur and can be knitted in any colours you like, even girly pinks and purples. My dear son loves this dino, and takes it to bed with him!
You can buy poly stuffing quite cheaply. This was an easy pattern, however it did seem like an eternity sewing up all those ends for the back plates. But was fun and glad I gave it a go.
Remember to always be extra careful sewing up toys for toddlers as they can be quite rough and tough on your knitted gift. Use a crochet hook to pull all the loose ends into the toy and firmly into the stuffing.
If you gave this pattern a go, let me know how you got on, I’d love to see the different colours you used. I used Hayfield fantasy in the green tones with orange and yellow toy yarn for the plates and spots.
Personalized Fathers Day Gift
I said I’d update you all on my Father’s Day project for my hubby from my 2yr old son. I started the embroidery yesterday afternoon. I was surprised how quickly it grew. It’s pictured here with the mount i intend to use. I used two shades of a silvery grey. The canvas I used is slightly off-white. But that’s ok, it’s not as contrast as it looks in the picture.
Below is a picture guide to how I went about this. Any suggestions for the bottom right hand corner would be good. Or even if this should be filled in. I did want to reference the year and a father son quote that relates to the hands.
Please let me know what you think below.
Mickey is number one!
For my son’s first birthday (last year) I baked him a Mickey Mouse theme cake. I used 9″ and 6″ cake tins to do this 2 tier cake.
I baked the cake base using this recipe or you could choose your own. You only need 1 and half times the recipe. One for the bottom and half is for the top. I halved my tiers and layered butter cream in the centre. You wouldn’t need to do this. But you will need to make a batch of butter cream to ‘stick’ the fondant to the cake.
To get the top cake, not to sink into the other cake while it’s on top, cause that just wouldn’t be pretty! Use 3 or 4 cut down straws or wooden skewers to the height of the fondant layer. Rest your cake on its own 6″ base or if using a different size tins it should measure the same as your cake so you can’t see it. It will be easier to remove it after for cutting that way. The bottom layer should probably have one at least an inch larger base than the bottom layer cake.
Ok, so you’ve baked your cake and let it cool, added butter cream to the outside and you’ve rolled out the fondant and placed it neatly over the top. Once it’s all smooth and square with the cake, you’ll want to start decorating. I only used supermarket fondant that is fairly cheap, but tasty. With the white you can also dye it any colour you like using gel colours. For mine I’m sure I used Ruby Red, Violet, and Christmas green and licorice black. Of course with any dying process you will have to add a bit at a time to get the colour you want.
The best technique I’ve found for blending the colour the best is by making a well in the white fondant ball and using a cocktail stick to control how much I put in. Place in a small amount and close the well up so the dye is inside. This will help stop the majority of the dye getting straight all over your hands. Cause it doesn’t come off your hands easily. Now roll, just using your hands, the ball into a sausage shape. You want it to be long enough to turn back on itself. Now just rinse and repeat until it is all blended. This method will help stop it sticking all on your hands too. If you add too much dye, try adding icing sugar powder to soak up the extra moisture. Now let the coloured icing sit aside and cool down. You could now dye another batch and so on. Once you have all the colours you want, return to the first colour as it should have cooled enough. Don’t leave it a long time or it will start to dry out. If you plan to use it later that day you can wrap it in cling film to stop it from drying up.
I used letter fondant cutter for his name. The Mickey heads were about 1.5″ in diameter. If you don’t have a tiny cutter for his ears (assuming you don’t just have a mickey mouse cutter) you can roll a small piece into a ball and press into shape straight onto the cake. You may want to test your sizing before going straight to the cake and make all your ear balls before applying them so they are uniform in size.
A way to get your fondant shapes to stick is to use an edible glue or make your own by using good spoon full of icing sugar and add drops of water until a glue consistency. Remember though, it takes more sugar to water to fix it if you put too much water in. So do it gradually.
You can finish of (or hide any messy edges) by using ribbon around the bottom of each layer. Hold in place with a tiny piece of clear tape or like I did using butter cream as a glue.
You should end up with an awesome, but more importantly, handmade cake! Enjoy giving and eating together! Hope you found this guide useful. Let me know if you try this! I love to share others photos too. Post a comment to contact me.
Knitted Hair Bow
Hope you like my latest crafty project. Including the time to figure out the pattern and write it down, this took about 10 minutes. It can be attached to any kind of hair accessory base. Hair clip, band, barrettes, slide, …you get the idea.
The yarn I used was a random ball from my stash. I’m not entirely sure of the yarn type but it is very similar to kid mohair. It felts very easily, but this will only help stabilize the design.
The pattern I used is below. Let me know if you use it. I’d love to see your take on it. Btw, I use standard abbreviations in my patterns. So you can refer to any knitting magazine or book if you’re not familiar with the terms.
Kfb = Knit into the front and back of stitch. This increases your row.
What you’ll need
10mm Knitting Needles
Mohair or similar yarn
Hair accessory base
C/o 2sts (make sure you leave at least an 8in tail, this is used to attach your button later, and used to attatch to your hair accesories)
1- kfb, kfb [4sts]
2- kfb, k2, kfb [6sts]
3- k2tg, k2, k2tg [4sts]
4- k2tg, k2tg [2sts]
5- k2tg [1st]
Keep last st on needle
Repeat Rows 1-5, cut yarn leaving 8in to fasten off, threading back through to the centre of the bow with both tails.
Position button in the middle of your bow and sew on using the tails of yarn. Pull tight and secure at back.
To attach to your clip or slide, use a multi-purpose glue that sticks fabric and metal, HT2 would be a good choice.
Quick Cactus Egg Cosy
If you would like to try this project here are the directions to make one cosy.
What you’ll need
2.5″ x 9″ Green Felt
Scraps of Coloured Felt for the Flower
Selection of Embroidery Thread in Beige and another coloured thread.
45 Silver Lined Sead Beads or whatever colour you would like
Felting Needle will help with the hand sewing, they are pyramid-shaped.
Cut out 3 arches that measure 3″ in width and 2.5″ in height. These templates should print out to size. Read the rest of this entry
On its way!
I finally got around to finishing this bear. I’m super happy with it, and glad it has been posted out today. My son adored it and tried to cuddle it while I was still knitting! That just made me think of how I just had to get it finished in time for this weekends post. So it can be safely delivered into a child’s arms.
This is the first ‘Mother Bear Project’ Bear I’ve completed, but it’s not the last. I will knit a ‘boy’ bear next, I think. Any suggestions on the outfit would be fab!
Want to Knit-a-square?
I stumbled across this organization Knit-a-square. With our help they provide warm blankets and clothing for sick children in South Africa.
There are lots of patterns to choose from too, such as hats, vests, jumpers and pull overs. If you are very creative you can share your own pattern too.
You don’t need to know how to knit to contribute to this project. If you have any old wool clothing or find any in the charity shops, you can felt them and cut the 8×8″ squares out of the felted fabric. Just by washing and using a dryer you can felt a knitted garment. This mats the fibres so when you cut the fabric it won’t fray or unravel.
It doesn’t matter what type of yarn you have. But take a look at their advice on what to use if you want to contribute to a heart warming cause.
Let me know if you have contributed already. If you have any pictures to share of your donations I would be happy to add them to this blog post!
Enhancing a simple knit scarf
A little project I was asked to do was to jazz up this hand knit scarf. A few sequins and beads later I came up with this. It’s quite a trend to have sequins sewn onto knitted accessories so for sure this is not ‘new’. But if you do this yourself it will definitely be unique.
To do this technique tie your sewing thread to the scarf where you would like the sequin. Thread your sequin and bead onto the needle and push to the fabric. Thread the needle back through the sequin and tie off below. Try not to go too deep through the scarf as you don’t want the thread showing on the other side. If your sequins aren’t too spaced you can do more than one at a time by threading your cotton through the scarf so that it can’t be seen. Do several of these and tie off securely.
Add some tassel with leftover yarn from your project. Add in a bit of coloured yarn to tie in the colours and you have a completely overhauled scarf!
Knit your own case
A cute little case for your Fuji camera. This only takes a couple hours at the most, including sewing on some decoration and adding the snap fasteners.
The stitches you need to know are casting on, knit, purl and casting off. If you don’t know how to do any of these stitches I advise you to search for a video tutorial. YouTube is usually a good source for this.
This is an ideal gift because you can use left over yarns and spare sequins and beads from other projects to decorate.
Here is how I did it.
Pink Striped Matinée Coat
Finally finished this awesome matinée coat. I posted about the yarn previously. Here are some images of the coat close up. Not sure if I shall do the bonnet yet but I will probably do the mittens soon.
The King Cole pattern used is pictured below. It just shows you can make an old pattern really modern with great choice of yarn. I was really pleased that this knitted up as stripes as I have a fixation with stripes. Can’t get enough!
Can’t wait to gift this to my niece.
‘…because we care’
Unfortunately, it appears this charity no longer exists. Please check official sources before thinking of contributing.
Angelbear is a non-profit organisation which is the notion that all children in a vulnerable position should own a teddy bear.
The lovely lady who runs this heart-felt project is very helpful when you ask about the bear and it’s pattern. If you need any help, she has a tutorial page that shows you all the basic stitches you need to complete the bear. But rest assured this is a suitable pattern for a beginner and knits up pretty quick.
I felt that I MUST make a teddy bear to contribute to this goal. She’s provides a pattern in which each bear should be based on. But if you have the ability you can change the pattern textures to any you like. This sort of thing really appeals to me so I took it upon myself to create a teddy bear with lots of pattern and texture. I wrote this pattern down. You can find it here. Feel free to use this pattern for non-profit and is suitable for this project too.
Visit the Angelbear website for more information on how to get involved.
All you need is some double knitting yarn in a couple of colours where possible and a pair of 4mm needles, a darning needle and polyester toy stuffing. Non of these items are all that expensive and most crafters will have most if not all of these items already. Just make sure they are new or freshly laundered
An ideal way to use up any leftover yarns you have and put a smile on a child’s face, which is worth more than anything!
My bear is already in the post. I urge you to get knitting too.