Hermione #2! This time I went for pink with rainbow mane and tail. I think this version looks even better than the last one.
Check out this free pattern on Ravelry. It’s SO freaking cute, it’s not too difficult, but I wouldn’t recommend it for beginners. The original pattern does not come with the wings pictured as I added those myself. If you’d like to add them too I have included the instructions in this post below. Enjoy!..
Wings – 3.5 Hook (Make 2)
Sc in 1st chain, skip 1 ch, sc in next 15 to end, ch2 turn.
Skip 1 st, sc in next and following 10sts
Slip st in next st, ch2, turn.
Skip 1 st, sc in next and following 3 sts.
chain 1, work 3 dc popcorn st in next stRepeat x5 .. Chain3, turn.
Make 3 Trebles in spaces between the popcorn sts already made below, slip st inside next popcorn st belowRepeat x3
Tie off + Sew on ..OR.. Slip st straight onto side of the body along top edge of the wing.
On the second wing you will want to push the popcorn stitches out the opposite way to the first wing. So you get a pair, and not two the same.
Free Knitting Pattern for a Doll 17″ Tall
3mm Needles – 4 ply yarn
Make 2 c/0 34sts
k2, p2 to end
p2, k2 to end
k2, p2 to end
p2, k2 to end
(Knit Row, Purl Row) x 5
k4, k2tg, k8, k2tg, k8, k2tg, k5, k2tg, k1
k4, k2tg, k4, k2tg, k6, k2tg, k4, k2tg, k4
k2, k2tg to end
k2tg to end
Cut yarn leaving 6 inches of thread, use this to thread through the loops remaining on the needle using a darning needle. Pull Tight and knot. Fold to join edges right sides together and sew up the seam. Additionally you, so they don’t get easily lost. Braid, or using a crochet hook create a chain long enough for your doll and tie to each wrist of the mittens. Thread through the clothing of the doll, just like you would for a child.
Hope you have fun knitting these easy cute mittens! They make a lovely gift, I will be posting more patterns for 17″ dolls soon.
Suitable for Chou Chou, Baby Annabell, Walk and Learn Doll and dolls of similar size.
I’ve been quite busy over the winter months, especially before Christmas. So I have a backlog of stuff I need to post. Most of the things you need for this are tools most people and almost definitely frequent crafters’ will have already.
The wall hanging is made from 2 x A4 chipboard (cardboard), cotton fabric, acrylic yarn and felt. Held together with fabric glue I used PVA glue as it does a good job, also I used some cotton embroidery thread. You’ll also need scissors, a hole punch suitable for heavy card and hammer, pencil, embroidery needle or a large sewing needle, iron, and last but definitely not least a decent craft knife/Stanley blade.
Made for my niece as a Christmas present. I wanted to include her name, Summah. The name is cut out using acrylic felt because it was what I had in my stash. But you could use any you have.
Draw out yourself a cloud design. To make it as even as mine you can cheat like I did and draw around something =] .
I used a plate and something else small I can’t remember, maybe a cookie cutter to draw the rainbow. You could just use a rectangle though instead of a rainbow shape. Cut both out with a blade.
At this point make sure you mark evenly according to the weight balance of your shapes the wholes and don’t punch them too close to the edge as it will not work very well. Important – Keep the bits you punch out. You’ll need them afterwards! Read the rest of this entry
Knitted Gifts Fast
This super chunky knitted scarf took less than a day start to finish. Including figuring the style and making the buttons. The pattern was one I thought of that would work best for this project.
You can use any alternatives but these are what I used and would bode best for this pattern. Plus the quality of the yarn speaks volumes on this project. Ideal as a winter time gift.
Dimensions 7.5″ x 28″
What you need
1 x ball of Sirdar Denim Ultra Wool (super chunky)
8mm Knitting Needles
3 x 15-18mm Odd but similar sized buttons with preferably 4 sewing holes.
Small piece of colour coordinating Wool Felt to cover buttons
Needle and thread
Using the 8mm knitting needles
Cast on 18 sts
(Rib pattern row)
[Row 1 -K2, P2 until last 2 stitches, K2]
[Row 2 -P2, K2 until last 2 stitches, P2]
knit Row 2 of rib pattern
knit Row 1 of rib pattern
(Body of scarf)
(right side row)Knit row
P2, K14, P2
K2, P14, K2
Continue scarf body pattern until you reach 26″ ending on a wrong side
Knit Row 2 of rib pattern
Knit Row 1 of rib pattern
Knit Row 1 of rib pattern
Knit Row 2 of rib pattern
Cast off and tie in any ends not weaved in.
The buttons were made using a simple technique. With leftover yarn from the scarf. There should be more than enough if you have good tension.
Cut 3 lengths of yarn at around 8″
3 x 2″ diameter felt circles, or big enough to cover the buttons as pictured.
Tie knots in the centre to make a bobble. Split the yarn so you have 4 tails (see picture below) and thread each through the 4 eyes of the button.
Using small stitches, make a running stitch around circles of felt. Do not knot yet.
Pull slightly on the thread so that it creates a slight dome shape. Place in the prepared knotted wool and button. Pull the thread and make sure the thread covers the back of the button centrally. Tie off the thread after sewing over the felt and yarn to secure the back, as these will be pulled at when used.
Using the picture to help you with placement, use the tails of the buttons to tie onto the rib of the scarf. Making sure they line up with the natural holes created by your stitches.
Knitted Gifts for Kids
I made this dinosaur from a magazine pattern, I forget which one, in September. It’s taken me a while to post on here as I’ve had a few distractions keeping me away. The magazine also features another dinosaur and can be knitted in any colours you like, even girly pinks and purples. My dear son loves this dino, and takes it to bed with him!
You can buy poly stuffing quite cheaply. This was an easy pattern, however it did seem like an eternity sewing up all those ends for the back plates. But was fun and glad I gave it a go.
Remember to always be extra careful sewing up toys for toddlers as they can be quite rough and tough on your knitted gift. Use a crochet hook to pull all the loose ends into the toy and firmly into the stuffing.
If you gave this pattern a go, let me know how you got on, I’d love to see the different colours you used. I used Hayfield fantasy in the green tones with orange and yellow toy yarn for the plates and spots.
A Birthday Gift for my Mother
If you remember an earlier post about me going to the craft fair in Birmingham. I posted about purchasing lots of wool roving, silk and embroidery threads along with a few other things. Well, this is one result of this shopping spree. Let me know what you think below with a comment. I love to hear peoples opinions!
I was inspired by some of the work created by the people who run 21st Century Yarns. I created my own bag pattern to work from, and for anyone who knows me, would know how much of a perfectionist I am when it comes to planning and executing my craft projects. It took me a while to figure out how I wanted it to look. In the end I was very happy with this design. Although if I could change one thing I would have added even stiffer interfacing. I did think it would be heavy enough though. Something to learn from I guess.
As you can see by the pictures, I used my machine to fix the threads that I layered over the cotton fabric. I took time to make sure the placement was right. I used a wide silver coloured ribbon as an added accent which I really love. The background layer is calico that has been dyed in different tones. The colours are subtle but really work well. It’s lined with a silver coloured hand woven silk that I picked up from a different stall.
I am going to make a cushion in this similar fashion. Except I’m going to work in wool felt to add a bolder texture. This will be in a red/plum and a selection of greens. Any questions about my crafts are welcome! Happy Crafting!
Stash Buster Project
So, I was given a free book of crochet patterns. It was from the May 2010 ‘Let’s Knit’ Issue. I hadn’t picked up a crochet hook for a long time. Since I struggled to complete a blanket for my unborn son at the time. But as this seemed quite quick, I referred to my ‘how to’ book of crocheting and finished it in a flash! These would make excellent stocking fillers. You could easily convert them to look Christmas-ee. Sorry I mentioned the ‘C’ word already. But hey, you gotta be prepared. So many crafting options, so little time.
The beads I used were glass, but I should have used more or chosen a heavier bead so that they would weigh it down to bring out the shape better. You could, of course, use any colour combination. I just used what I had, and I just happened to only have white in 4 ply. The suggest you can use ribbon, but you could use any yarn you like. Just choose an appropriate hook and if your yarn or yarn substitute is much thicker then make reduce the amount of rounds you make.
If you missed this issue and would like to get this pattern. It can be found in the book ‘Two Balls or Less’ by Jenny Hill. It’s RRP is about £12.99 and has over 30 simple crochet and knitting projects.
As an added note, the hook used is 3.5mm.
Knitted Hair Bow
Hope you like my latest crafty project. Including the time to figure out the pattern and write it down, this took about 10 minutes. It can be attached to any kind of hair accessory base. Hair clip, band, barrettes, slide, …you get the idea.
The yarn I used was a random ball from my stash. I’m not entirely sure of the yarn type but it is very similar to kid mohair. It felts very easily, but this will only help stabilize the design.
The pattern I used is below. Let me know if you use it. I’d love to see your take on it. Btw, I use standard abbreviations in my patterns. So you can refer to any knitting magazine or book if you’re not familiar with the terms.
Kfb = Knit into the front and back of stitch. This increases your row.
What you’ll need
10mm Knitting Needles
Mohair or similar yarn
Hair accessory base
C/o 2sts (make sure you leave at least an 8in tail, this is used to attach your button later, and used to attatch to your hair accesories)
1- kfb, kfb [4sts]
2- kfb, k2, kfb [6sts]
3- k2tg, k2, k2tg [4sts]
4- k2tg, k2tg [2sts]
5- k2tg [1st]
Keep last st on needle
Repeat Rows 1-5, cut yarn leaving 8in to fasten off, threading back through to the centre of the bow with both tails.
Position button in the middle of your bow and sew on using the tails of yarn. Pull tight and secure at back.
To attach to your clip or slide, use a multi-purpose glue that sticks fabric and metal, HT2 would be a good choice.
Quick Cactus Egg Cosy
If you would like to try this project here are the directions to make one cosy.
What you’ll need
2.5″ x 9″ Green Felt
Scraps of Coloured Felt for the Flower
Selection of Embroidery Thread in Beige and another coloured thread.
45 Silver Lined Sead Beads or whatever colour you would like
Felting Needle will help with the hand sewing, they are pyramid-shaped.
Cut out 3 arches that measure 3″ in width and 2.5″ in height. These templates should print out to size. Read the rest of this entry
On its way!
I finally got around to finishing this bear. I’m super happy with it, and glad it has been posted out today. My son adored it and tried to cuddle it while I was still knitting! That just made me think of how I just had to get it finished in time for this weekends post. So it can be safely delivered into a child’s arms.
This is the first ‘Mother Bear Project’ Bear I’ve completed, but it’s not the last. I will knit a ‘boy’ bear next, I think. Any suggestions on the outfit would be fab!
Want to Knit-a-square?
I stumbled across this organization Knit-a-square. With our help they provide warm blankets and clothing for sick children in South Africa.
There are lots of patterns to choose from too, such as hats, vests, jumpers and pull overs. If you are very creative you can share your own pattern too.
You don’t need to know how to knit to contribute to this project. If you have any old wool clothing or find any in the charity shops, you can felt them and cut the 8×8″ squares out of the felted fabric. Just by washing and using a dryer you can felt a knitted garment. This mats the fibres so when you cut the fabric it won’t fray or unravel.
It doesn’t matter what type of yarn you have. But take a look at their advice on what to use if you want to contribute to a heart warming cause.
Let me know if you have contributed already. If you have any pictures to share of your donations I would be happy to add them to this blog post!
This huge exhibition has so many talented artists and many interesting crafts to explore.
My favourite stall holder was 21st Century Yarns, with their hand dyed yarns and cloth. I am going to be using these threads for a few different projects. A silk embroidered hand/clutch bag, an embellished cushion.
I also purchased some 100% cotton yarn, hand dyed in Chile by Araucanía Yarns. It’s a smooth thick yarn, pictured in blue, black and green. Can’t wait to make myself and my son a snuggly scarf with the lush one-off hanks. Each one sold creates more opportunities for the local people of Chile, bringing new skills, jobs and hope fr the future.
Check back here soon to see what I make of these super lush fabrics.
Yarn and Needle sizes
It’s important to know that you’re using the right sized tools when doing any project. Here are some terms and size charts used when Knitting.
Knitting Needle Sizes Read the rest of this entry
Knit your own case
A cute little case for your Fuji camera. This only takes a couple hours at the most, including sewing on some decoration and adding the snap fasteners.
The stitches you need to know are casting on, knit, purl and casting off. If you don’t know how to do any of these stitches I advise you to search for a video tutorial. YouTube is usually a good source for this.
This is an ideal gift because you can use left over yarns and spare sequins and beads from other projects to decorate.
Here is how I did it.
Pink Striped Matinée Coat
Finally finished this awesome matinée coat. I posted about the yarn previously. Here are some images of the coat close up. Not sure if I shall do the bonnet yet but I will probably do the mittens soon.
The King Cole pattern used is pictured below. It just shows you can make an old pattern really modern with great choice of yarn. I was really pleased that this knitted up as stripes as I have a fixation with stripes. Can’t get enough!
Can’t wait to gift this to my niece.
‘…because we care’
Unfortunately, it appears this charity no longer exists. Please check official sources before thinking of contributing.
Angelbear is a non-profit organisation which is the notion that all children in a vulnerable position should own a teddy bear.
The lovely lady who runs this heart-felt project is very helpful when you ask about the bear and it’s pattern. If you need any help, she has a tutorial page that shows you all the basic stitches you need to complete the bear. But rest assured this is a suitable pattern for a beginner and knits up pretty quick.
I felt that I MUST make a teddy bear to contribute to this goal. She’s provides a pattern in which each bear should be based on. But if you have the ability you can change the pattern textures to any you like. This sort of thing really appeals to me so I took it upon myself to create a teddy bear with lots of pattern and texture. I wrote this pattern down. You can find it here. Feel free to use this pattern for non-profit and is suitable for this project too.
Visit the Angelbear website for more information on how to get involved.
All you need is some double knitting yarn in a couple of colours where possible and a pair of 4mm needles, a darning needle and polyester toy stuffing. Non of these items are all that expensive and most crafters will have most if not all of these items already. Just make sure they are new or freshly laundered
An ideal way to use up any leftover yarns you have and put a smile on a child’s face, which is worth more than anything!
My bear is already in the post. I urge you to get knitting too.
Free Knitting Pattern for www.angelbear.org.uk
‘Make a bear. Make a difference’
The Mother Bear Project is a non-profit organisation intent on bringing hope and comfort to children, primarily affected by HIV/Aids all over the world. Many will be orphans. These children will be in need of love and comfort and will receive a hand knitted or crocheted bear. Click here to see pictures.
This simple act of giving a teddy bear to a child who has nothing else in the world is truly heart-warming and sends them a message that they are cared for, and that they do matter. I have recently requested a pattern from this wonderful project and can’t wait to start. I urge you to do the same. Please visit the website for more details.
All bears are created from the same pattern. Each pattern you order includes a tag for you to sign and attach to your bear before sending. Once they receive your bear they will sew on a red felt heart before shipping it out to a needy child.
I’ll be posting my contribution as soon as it is made so please subscribe to this blog to receive updates!
Even if you can’t knit or crochet. You can give by sending supplies or donating time or money to this organisation.
To date, 49,650 bears have been sent to children affected by HIV/AIDS through their help!
I wanted to share with you this awesome double knitting yarn. I wanted something that would be interesting to knit so I chose this ball of wool. To my delight it knits up really great with the pattern I have.
The pictures below show you my progress. I will be posting the finished pieces at a later date. I have a coat, bonnet and mittens to complete.
Choosing a more interesting yarn has kept me focused on this long term project. Don’t be put off by how many colours are in this. Definitely will try multi-coloured yarns again!
To view the finished Coat please go Here